Connecting To An Antenna; Plug & Play (Initial Setup) - Samsung 750 Series User Manual

When the TV is initially powered on, basic settings proceed automatically.
Connecting the mains and antenna.
Power Input
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
To return to the previous step, press the red button.
1
Selecting a language
2
Selecting Store Demo
or Home Use
3
Selecting an antenna
4
Selecting a channel
5 Setting the Clock
Mode
6
Viewing the HD
Connection Guide
7
Enjoy your TV.
If You Want to Reset This Feature...
O
m
MENU Setup

Connecting to an Antenna

Plug & Play (Initial Setup)
Press the or button, then press the ENTERE button.
Select the desired OSD (On Screen Display) language.
Press the or button, then press the ENTERE button.
y
Select the Home Use mode. Store Demo Mode is for retail
environments.
y
To return the unit's settings from
(standard): Press the volume button on the TV. When you see the
volume in the OSD, press and hold
Press the or button, then press the ENTERE button. Select Air, Cable or Auto.
In Cable mode, you can select the correct signal source among STD, HRC, and IRC
by pressing the , ,
The channel search will start automatically.
For more information, refer to Channel
Press the ENTERE button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
If you select the Auto, set the daylight saving time.
Select the time zone which you live.
The connection method for the best HD screen quality is displayed.
Press the ENTERE button.
Plug & Play ENTERE
or
Store Demo to Home Use
MENU for 5 sec.
or button, then press the ENTERE button.
Auto Program. (P. 13)
Plug & Play
Time
Menu Language
Caption
Security
Network
General
PIP
VHF/UHF Antenna
Cable
ANT OUT
POWER
P
: English
: Off
: Off
7
English