Table of Contents
Advertisement
Start pairing procedure on mobile phone
• Search for available devices on your Bluetooth
usually within Settings or Options under "Bluetooth". See your mobile phone's
manual for details.
• When your phone finds the system, select "Uconnect" as the paired device.
You may be prompted by your phone to download the phonebook. This is so you can
make calls by saying the name of your contact (PBAP-Phone Book Access Profile).
Complete the pairing procedure
• When prompted on the phone, enter the 4-digit PIN number shown on the
Uconnect
®
Screen.
• If your phone asks you to accept a connection request from Uconnect, select
"Yes". If available, check the box telling it not to ask again – that way your phone
will automatically connect each time you start the vehicle.
Select the mobile phone's priority level
• When the pairing process has successfully completed, the system will prompt you
to choose whether or not this is your favorite phone. Selecting Yes will make this
phone the highest priority. This phone will take precedence over other paired
phones within range. Only one phone can be paired at a time.
• You are now ready to make hands-free calls. Press the Uconnect
your steering wheel to begin.
Making A Phone Call
• Press the Uconnect
• After the BEEP, say "dial" then the number (or "call" then the name as listed in
your phone; see Phonebook).
NOTE:
You can also initiate a call by using the touch-screen on the Phone main screen.
Receiving A Call – Accept (And End)
• When an incoming call rings/is announced on Uconnect
button
.
• To end a call, press the Phone button
Mute (Or Unmute) Microphone During Call
• During a call, touch the mute soft-key on the Phone main screen to mute and
unmute the call.
®
Phone button
ELECTRONICS
®
enabled mobile phone. This is
.
.
Phone button on
®
, press the Phone
®
91
Advertisement
Table of Contents
