Operation Of The Screenlifter; Control Functions And Characteristics - Panasonic TH-103PF9EK Operating Instructions Manual

4. Operation of the ScreenLifter

4.1 Control Functions and Characteristics

The ScreenLifter has a built-in synchronous control to lift and lower the two runners in the lifting columns.
When lifting and lowering the load, the operation duration of the control, as specified on the type
label (1min. ON, 9 min. OFF) may not be exceeded. When overheating, the equipment switches OFF
automatically and the display shows the message "HOT". In this case, wait until the control has cooled
down and the message "HOT" has ceased. Wait at least 15 minutes in any case.
The ScreenLifter is operated with the control panel in the cap of the ScreenLifter (POS15) or with an
additional cable remote control. (Optional accessory).
The basic functions are lifting and lowering the cap for unloading and loading (Unload/load) and lifting and
lowering the display ("Lift Screen"). The three-digit display of the control panel approximately shows the
height of the lower display edge in cm in relation to the surface level. The illustration below shows the
control panel with the keys "LIFT", "O", "DOWN", "UP" and the height and error message display.
8