Multifunctional Settings; Using The Menu Function - Hitachi CP-X445 User Manual – Operating Manual

Multifunctional settings

Using the menu function

This projector has the following menus: PICTURE, IMAGE, VIDEO Qlty., INPUT, SETUP,
SCREEN, OPTION, NETWORK and EASY MENU. Each of these menus is operated using
the same methods. The basic operations of these menus are as follows.
1.
Press the MENU button on the remote control or one of
the cursor buttons on the projector.
The advanced MENU or EASY MENU will appear.
At the EASY MENU
2.
If you want to change it to the advanced MENU, select the
"Go to Advanced Menu".
3.
Use the cursor buttons ▲/▼ to select an item to operate.
4.
Use the cursor buttons◄/► to operate the item.
At the advanced MENU
2.
Use the cursor buttons ▲/▼ to select a menu.
If you want to change it to the EASY MENU, select the
EASY MENU.
Then press the cursor button ► on the projector or remote
control, or the ENTER button on the remote control to progress. The display of
the selected menu will be active.
3.
Use the cursor buttons ▲/▼ to select an item to operate.
Then press the cursor button ► on the projector or remote control, or the ENTER button
on the remote control to progress. The operation menu of the selected item will appear.
4.
Use the cursor buttons▲/▼ to operate the item.
● When you want to reset the operation, press the RESET button on the remote
control during the operation. Note that items whose functions are performed
simultaneously with operation (ex. LANGUAGE, H PHASE etc.) aren't reset.
● At the advanced menu, when you want to return to the previous display, press the cursor
button ◄ on the projector or remote control, or the ESC button on the remote control.
5.
Press the MENU button on the remote control again to close the menu
and complete this operation. Even if you don't do anything, the dialog will
automatically disappear after about 10 seconds.
● Some functions cannot be performed when a certain input port is selected, or
when a certain input signal is displayed.
Downloaded From projector-manual.com Hitachi Manuals
LAMP
TEMP
POWER
STANDBY/ON
MENU
INPUT
KEYSTONE
RESET
STANDBY/ON VIDEO
BLANK
ENTER button
ASPECT
Cursor buttons
PUSH
ENTER
MENU button
ESC
POSITION
RESET button
MAGNIFY
ON
OFF
Operating
LASER
INDICATOR
RGB
UP
PAGE
DOWN
LASER
LASER
INDICATOR
STANDBY/ON VIDEO RGB
UP
PAGE
DOWN
BLANK LASER
ASPECT
PUSH
ENTER
ESC MENU RESET
MENU RESET
POSITION AUTO
MAGNIFY VOLUME
ON
AUTO
FREEZE MUTE
OFF
KEYSTONE ONE TOUCH
VOLUME
FREEZE MUTE
MENU [RGB] :SELECT
KEYSTONE ONE TOUCH
PICTURE BRIGHT ＋0
IMAGE CONTRAST ＋0
VIDEO Qlty. GAMMA DEFAULT 1
INPUT COLOR TEMP 6500K
SETUP COLOR +0
SCREEN TINT +0
OPTION SHARPNESS +0
NETWORK MY MEMORY SAVE 1
EASY MENU
EASY MENU
ASPECT 4:3
MODE NORMAL
+0
BRIGHT
+0
CONTRAST
+0
COLOR
+0
TINT
+3
SHARPNESS
WHISPER NORMAL
MIRROR NORMAL
RESET
FILTER TIME 0
LANGUAGE ENGLISH
Go To Advance Menu...
23