SONIQ Qmedia DVP1000 Operation Manual page 41

Table of Contents

Advertisement

Troubleshooting
Symptom
Video does not appear with an
external component connected to
DVD
the DVD player
Battery pack does not charge
Power does not turn on
Battery
pack
operation
Power charge lamp does
not light (Battery pack does
not charge)
Battery
Power charge lamp quickly
pack
flashes Green
operation
Check
• Check that the TV is set to VIDEO or AV.
• Check that the video or audio cable is securely connected.
• A hot battery pack may take longer to charge.
Wait until the battery pack is sufficiently cooled down.
• Replace with a fully charged battery pack or use the AC
adapter.
• Replace with a fully charged battery pack or use the AC
adapter.
If the DVD player is overheated and the battery pack's internal
temperature goes up to a certain level, you will not be able to
charge the battery pack.
In this occurs, remove the battery pack. After the battery pack
has sufficiently cooled down, charging will begin automatically.
• Check that the temperature is within the range of 50°F~86°F.
• Check that the DC cord of the AC adapter is plugged in correctly.
• Remove the DC cord from the battery pack and then re-plug.
If the battery pack is installed, remove the DC cord from the
battery pack before performing above procedure.
• Recharge a different power pack. If the same symptom
occurs, your AC adapter may be defective. If the second
battery pack charges without any problem, your first battery
pack may be defective or needs battery replacement.
- 40-

Advertisement

Table of Contents
loading

Table of Contents