Signal Lever/Headlight High-Low Beam; Map Light Switch; Steering Column Adjustment - Winnebago Ellipse User Manual

Hide thumbs Also See for Ellipse:
Table of Contents

Advertisement

SECTION 3 –
DRIVING YOUR MOTOR HOME
SIGNAL LEVER/HEADLIGHT
HIGH-LOW BEAM
The signal lever controls the turn signals and
headlight high/low beams.
Turn Signals/High-Low Beams
(Typical View - your coach may differ
depending on model)
Move multi-function lever upward for right
turn signal and downward for left turn signal.
An audible chime will alert you when the
signals are flashing.
Pull end of handle toward you to switch
headlight high/low beams.
Further Information
See your chassis manual for further operating
instructions and features.

MAP LIGHT SWITCH

Turn the map light on using the Panel Light
brightness thumbwheel control. Roll it upward
until you feel it click into the map light "On"
position.
The "Push" dial (for fog lights) are non-
functional.
3-16
Further Information
See your chassis manual in your InfoCase for
further information on this switch.
STEERING COLUMN
ADJUSTMENT
The tilt/telescope adjustment pedal is located
on the floor to the left of the steering column as
shown.
Press pedal to adjust steering
wheel tilt or telescope
Adjust Steering Wheel or Column
Press the pedal down to adjust either the tilt or
telescope. Release the pedal when you have
adjusted the tilt angle or steering wheel distance
to your preferred position.

Advertisement

Table of Contents
loading

Table of Contents