Connecting To An Antenna; Plug & Play (Initial Setup) - Samsung 450 series User Manual

Connecting to an Antenna
o
When the TV is initially powered on, basic settings proceed automatically.
~ Connecting the power cord and antenna.
~
~
Power Input
Cable
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERC) button. Plug & Play is available only when the Input source is set to TV.
~ To return to the previous step, press the red button.
Press the ENTER
~
button.
Press the A or ~ button, then select the desired OSD (On Screen
Display) language.
Press the ~ or ~ button, then press the ENTER ~ button.
• Select the Home Use mode. Store Demo Mode is for retail
environments.
• To return the unit's settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the
volume in the 080, press and hold MENU for 5 sec.
Press the A or ~ button, then press the ENTER ~ button. Select Air, Cable or Auto.
~ In Cable mode, you can select the correct signal source among STD, HRC, and IRC
by pressing the
A,
~, ~ or ~ button, then press the ENTER ~ button.
The channel search will start automatically.
For more information, refer to Channel ~ Auto Program. (P.12)
~ Press the ENTER ~ button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
~ If you select the Auto, set the daylight saving time.
Select the time zone where you live.
The connection method for the best HD screen quality is displayed.
Press the ENTER
~
button.
Selecting a language
Selecting Store Demo
or Home Use
Selecting an antenna
Selecting a channel
Setting the Clock
Mode
2
4
5
3
1
Viewing the HD
Connection Guide.
;::::=======:.-=:
Enjoy your TV.
If You Want to Reset This Feature...
(8
MENU
[[II
~
Setup
~
Plug & Play
~
ENTER
~.
Menu Language
Caption
Security
General
: English
; On
: Off
English
7