Canon PowerShot S2IS User Manual page 234

421
Operating the Shutter Remotely
RemoteCapture task Window
The RemoteCapture Task window has the following features.
Shows/Hides the
viewfinder or detailed
settings area.
You can add
comments to images
by placing a check
mark here and
typing text in the
boxes below.
Viewfinder Display
Click the [Start/Stop
Viewfinder] button
while a connection to
the ca mera is open to
display the image
appearing in the
camera's viewfinder.
Size and Resolution Selector
Selects the size and resolution at which images are captured.
r------
Rotation Settings
G0'1111!llli.IIIII"llllllrII1~~111111'II'i'11Il'.~~~1
Sets the rotati on
I,t;~
parameters for
images after they are
captured.
Release Button
Releases the
shutter.
---Slide this to zoom
the camera in or out.
Start/Stop Viewfinder
Button
Starts or stops the
viewfinder display.
Refresh Button
Resets the exposu re,
focus and white
balance.
Set the basic camera settings here.
-The settings available in the RemoteCapture Task window vary between
camera models.
- RemoteCapture Task locks the exposure and focus settings for the subject
matter in the Viewfinder section. If the lighting or distance to the subject
changes, click to reset these settings.