Sony BDV-E6100 Operating Instructions Manual page 41
Blu-ray disc/ dvd home theatre system
Hide thumbs
Also See for BDV-E6100:
- Reference manual (98 pages) ,
- Speaker installation manual (2 pages) ,
- Quick setup (2 pages)
Advertisement
2
Press */.
to select _
[Setup].
3
Press *It
to select [Audio
Settings], then press @.
4
Press t/_ to select [Speaker
Settings], then press @.
The [Select speaker layout.] display
appears.
5
Press t/_ to select setting
according
to your speakers
placement,
then press @.
• [Standard]: The surround speakers
are installed ill the rear position.
• [All Front]: All speakers are installed
ill the front position.
The [Distance] and [Level] settings are reset
to deli.mlt settings each time you change the
speaker layout setting.
6
Press
t/,t
to select
the item, then
press
@.
7
Press
_/_
to adjust
the
parameter.
8
Press
./.
and
@ to confirm
the
settings.
Check
the following
settings.
•
[Distance]
Be sure to set the parameters
of the distance
from
the listening
position
to the speakers.
You can set the parameters
from 0 to
23 feet (0.0 to 7.0 meters).
[Front Left/Right]
10 ft/3.0 m: Set the front
speaker
distance.
[Center]
10 ft/3.0 m: Set the center
speaker
distance.
[Surround
Left/Right110
ft/3.0
m: Set the
surround
speaker
distance.
[Subwoofer]
10 ft/3.0 m: Set the subwoofer
distance.
You can change file unit of measuremem
(feet or
meters) by pressing the color button (RE[)).
• [Level]
You can adjust the sound
level of the
speakers.
You can set the parameters
from
-6.0
dB to +6.0 dB. Be sure to set [Test
Tone]
to IOn] for easy adjustment.
[Front
Left/Right]
0.0 dB: Set the front
speaker
level.
[Center]
0.0 dB: Set the center
speaker
level.
[Surround
Left/Right
I 0.0 dB: Set the
surround
speaker
level.
[Subwoofer]
0.0 dB: Set the subwoofer
level.
• [Test
Tone]
The speakers
will emit a test tone to adjust
[Level].
[Off]: The test tone is not emitted
from
the
speakers.
IOn]: The test tone ix emitted
from each
speaker
in sequence
while adjusting
level.
When
you select
one of the [Speaker
Settings]
items,
the test tone ix emitted
from each speaker
in sequence.
Adjust
the sound
level as follows.
1
Set [Test Tone] to [On].
2 Press 4./,t to select [Level], then
press @.
3 Press ,J/,t to select the speaker type
you want, then press @.
4 Press ./.
to select the left or right
speaker, then press ,J/,t to adjust the
level.
5 Press @.
6 Repeat Steps 3 to 5.
o
0
(i)
-.t
41 us
Advertisement
