Status Lights (Leds); Call Timer; Line/Call Appearance Keys - Aastra 6757i Installation Manual

• To adjust the headset volume, press the volume button
the headset is activated (activate the headset by pressing
headset audio mode is set). The headset will remain at this volume until
it is adjusted again.
• To adjust the speaker volume, press the volume button
the speaker is activated (activate the speaker by pressing
handsfree speakerphone audio mode is set). The speaker will remain at
this volume until it is adjusted again.

Status Lights (LEDs)

The speaker LED, beside the
Indicator (MWI) LED, on the top right of your phone, provide visual
indications of your phone's status.
Speaker LED
Speaker LED Status
ON solid
Slow Flash
Rapid Flash
Message Waiting Indicator (MWI)
MWI LED Status
Slow Flash
Rapid Flash
Even Flash

Call Timer

• When you make or answer a call, the Timer shows the elapsed time of
the call.

Line/Call Appearance Keys

The 6757i has 4 hard/line call appearance keys each with a corresponding
status light. Additional line call appearances may also be set up on your
phone as softkeys.
These line/call appearance buttons and lights represent physical lines or
calls for your extension. By pressing a line call appearance button, you
connect to the line or a call it represents. The line call appearance light
indicates the status of that line or call.
When the phone is taken off-hook, the phone will automatically select a
line for you.
Line Call Appearance LED Status
OFF
key, and the Message Waiting
Description
Indicates a call is on Handsfree (speakerphone)
Indicates you are using the headset.
Indicates the call is muted. Press
call off mute.
Description
Indicates you have a message(s).
Indicates you have an incoming call.
Indicates one or more calls are on hold.
Description
Indicates idle line or no call
activity
Model 6757i IP Phone Installation Guide 19
while
; ensure
while
; ensure
to take the