Canon LV-X4U Service Manual page 5

3. Tools & Test Equipment
The following tools and equipment are required to perform disassembly, reassembly
and adjustment.
1) Special Tools
None
2) General Purpose Tools (Commercially available, but can be purchased with
the following numbers.)
Description
Ball Driver
Hex Key Set
Driver, adjustment
Driver, Slot
Driver, Cross-point
3) Test Equipment
Description
Digital Multi-meter
Video Signal Generator
Computer Signal
Generator
Oscilloscope
4) Other Equipment
Description
Screen
Personal Computer
5) Chart/Software
Description
Monitor Tester
Gray Scale Chart
Color Shading
Correction Tool
Tool No.
CY9-5002-000
CY9-5007-000
CY9-5003-000
CY9-5004-000
CY9-5005-000
Tool No.
Commercially
available
Commercially
available
Commercially
available
Commercially
available
Tool No.
Commercially
available
Commercially
available
Tool No.
Supplied with manual Bitmap Data
Supplied with manual (XGA and SVGA)
Supplied with manual Ver. 3.03
Specification
2.0mm
2.0mm
1.8mm
4.0mm
No.2
Specification
DC1mmV~500V
Color Bars and Gray
Scale
Gray Scale
(or personal computer)
100MHz response or
over
Specification
Over 40"
Windows 98/2000 OS
Specification
II
Remarks
Optical Parts Removal
& Adjustment
Optical Parts Removal
& Adjustment
Electrical Adjustments
Optical Parts Adjustment
Assembly & Disassembly
Remarks
Electrical Adjustment
Electrical Adjustment
Electrical Adjustment
Waveform Checks and
Electrical Adjustment
Remarks
All Adjustment
All Adjustment
Remarks
All Adjustment
All Adjustment
White Uniformity
Adjustment