Startover Key - ELNA eXpressive 900 Instruction Manual

q
w
w
e
r
q

Startover key

This is a 2-way function key to start sewing a pattern
combination over from the beginning.
When you stop sewing a pattern combination, the star-
tover key is activated.
The key shows a triangle and single bar that means the
machine will start over from the current pattern.
When you press the startover key, the key will change and
show a triangle and double bar that means the machine
will start over from the first pattern of the
combination.
Current pattern startover
If you wish to start sewing from the beginning of the cur-
rent pattern, press the startover key once and start the
machine.
q Startover key (current pattern)
w Current pattern
First pattern startover
If you wish to start sewing from the beginning of the first
pattern of the combination, press the startover key twice
and start the machine.
e Startover key (first pattern)
r First pattern
NOTE:
If auto thread cutting is done, the machine will startover
from the first pattern.
Checking pattern combination length
You can check the total length of the pattern combina-
tion by pressing on the stitch image indicated in the left
window.
The readout of the total length is a theoretical value and
the actual length may vary depending on sewing condi-
tions.
For example, program pattern P17 three times, and sew a
pattern combination.
If the actual length differs considerably from the readout,
measure the actual length and enter the nearest value by
pressing the "+" or "–" key.
q Actual length
The readout is adjusted automatically when calculating
the length of other pattern combinations (combination of
patterns P7, P12 and P17 for example).
62