Names and functions of parts
POWER button (
ON/
to turn the unit on or off.
Speed selector button (33/45): Set this button
according to the record's playing speed.
Center spindle
Rubber mat
Turntable
Counterweight: Use this to balance the tone arm and
to adjust the stylus pressure.
Head shell
6
OFF): Press this button
START/STOP button: Rotates/stops the turntable.
Locking nut: Use this to install the head shell.
Tone arm
Arm clamp: Secures the tone arm to the arm rest.
Arm rest: Table to mount the tone arm.
Lifter lever: Use this to lift and lower the tone arm.
Anti-skating knob: Use this to adjust the anti-skating.
*
The turntable, rubber mat, counterweight and head shell are not
fitted at the point of purchase. Refer to "Assembly" on the next
page to assemble them.