Manual Rinse Cycle - Saeco Intuita HD8750 User Manual

ENGLISH
12

Manual rinse cycle

During this process you brew a co ee and fresh water ows through the
steam/hot water circuit. This takes a few minutes.
1
Place a container under the dispensing spout.
2
Check that the " ", "
3
Press the " " button. The machine starts dispensing water.
4
When the dispensing has nished, empty the container.
Repeat the operations from step 1 to step 3 twice, then continue with
step 5.
5
Place a container under the Pannarello.
6
Press the " " button to start dispensing hot water.
7
Dispense water until the no water light "
8
At the end, ll the water tank again up to the MAX level. Now the the
machine is ready for brewing co ee.
Note:
When you haven't used the machine for 2 or more weeks, the machine
will automatically perform an automatic rinse/self-cleaning cycle after
you switch it on. Thereafter you need to initiate the manual rinse cycle as
described above.
The automatic rinse/self-cleaning cycle is also initiated automatically when
starting up the machine (with cold boiler), when the machine is preparing
to go into stand-by mode, or you have pressed the "
co ee has been brewed).
", " " " " lights ash steadily.
" shines steadily.
" button (after a