Pirelli P.RG F4202N User Manual page 34

P.RG F4202N
LAN Bridge >> Settings Panel
FIGURE 3.
Schedule. By default, the connection will always be active. However, you can
configure scheduler rules in order to define time segments during which the
connection may be active. Once a scheduler rule(s) is defined, this field
changes to a combo-box, allowing you to choose between the available rules.
Network. Select whether the parameters you are configuring relate to a WAN,
LAN or DMZ connection, by selecting the connection type from the combo-box.
Physical Address. The physical address of the network card used for your
network. Some cards allow you to change this address.
MTU. MTU is the Maximum Transmission Unit. It specifies the largest packet
size permitted for Internet transmission. In the default setting, Automatic, the
© (2010) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
28 HBK 939800036-A1 Network Connections Section