Additional Features; Star Codes; Call Waiting; Suppress Dtmf Playback - Aastra 6739i User Manual

Additional Features

This section describes additional features you can use on the 6739i phone.

Star Codes

All of the main call handling and extension management features using star codes can be set on your phone by your
Administrator. Contact your System Administrator for more information.
If these have not been set up, you can dial any star code commands on the 6739i phone the same way you would on a reg-
ular telephone.

Call Waiting

The call waiting feature notifies the user on an active call, of a new incoming call. Call Waiting can be enabled/disabled by
your System Administrator only.
If Call Waiting is enabled on your phone, an audible tone is heard on the active line indicating a call is coming in. The Call
Waiting Tone is enabled by default. You can disable it using the Aastra Web UI at the path Basic Settings->Preferences. You
can also set the Call Waiting Tone Period which specifies the time period, in seconds, that the call waiting tone is audible
on an active call when another call comes in.
If you disable call waiting on the phone, and the user is on a call, any further incoming calls receive busy unless "Call For-
ward Busy" or "Call Forward No Answer and Busy" is configured on the phone (for information on
"Call Forward Account-Based
If Call Waiting is disabled, the phone can:
• transfer the currently active call
• or
• accept transferred calls if there are no active calls.
• treat intercom calls as regular incoming calls and reject them.
In addition, the Missed Calls List does not get updated with details of calls. The Blind Transfer feature on the phone may
not work if two calls are made to the phone at one time.

Suppress DTMF Playback

A feature on the IP phones allows you to enable or disable the suppression of DTMF playback when a number is dialed
from the keys on your phone.
When suppression of DTMF playback is disabled, and you press a key, the IP phone dials the stored number and displays
each digit as dialed, in the LCD window.
When the suppression of DTMF playback is enabled, the IP phone dials the stored number and displays the entire number
immediately in the LCD window, allowing the call to be dialed faster.
DTMF playback suppression is enabled by default. Disabling suppression of DTMF playback can be configured using the
Aastra Web UI.
41-001317-05 REV00 – 03.2011
Configuration", see page 154.) It then forwards the call according to the rule configured.
Additional Features
165