Zooming; Quick Start Function - Canon Vixia HF11 Instruction Manual

Zooming
CD
NOTES
Quick Start Function
c.•_ ..•: ..•:....•..-'
[:.i~f:]
.
(CD 26)
1
With the camcorder on and in a
recording mode, close the LCD
panel.
A beep will sound and the
jil'.
indicator will change to orange to
indicate the camcorder entered the
standby mode.
When you close the LCD panel with the
camcorder on, the camcorder enters
the standby mode. In standby mode the
camcorder consumes only about half
the power used when recording, saving
energy when you are using a battery
pack. Additionally, when you open the
LCD panel, the camcorder is ready to
start recording in approximately
1 second, ensuring you do not miss
important shooting opportunities.
• Keep at least 1 m (3.3 ft.) away from the
subject. At full wide angle, you can
focus on a subject as close as
1
cm
(0.39 in.).
• When [ZOOM SPEED] is set to
[ 8 VARIABLE]:
I
- When you use the T and W buttons on
the wireless controller or LCD panel,
the zoom speed will be constant at
[tE
SPEED 3].
- The zoom speed will be faster in
record pause mode than when actually
recording.
T Zoom in
+
WZoom out
Move the zoom lever toward W to
zoom out (wide angle). Move it
toward T to zoom in (telephoto).
Press gently for a slow zoom; press
harder for faster zooms. You can also
set [ZOOM SPEED] (OJ 93) to one of
three constant speeds (3 is the fastest,
1 the slowest).
12x
Optical Zoom
(CD 26)
(;.t;~
mode: In addition to the optical
zoom, digital zoom is also available
(CD 93).
37