Description Of Function & Circuit Of Micom (Best, Dispenser) - LG LRDN22734SB Service Manual

8. DESCRIPTION OF FUNCTION & CIRCUIT OF MICOM
8-1 FUNCTION
8-1-1 Function
1. When the appliance is plugged in, it is set to 37 °F for the Refrigerator and 0 °F for the Freezer.
You can adjust the Refrigerator and the Freezer control temperature by pressing the COLDER button or the WARMER
button.
2. When the power is initially applied or restored after a power failure, it is set to the setting temperature as you set before
power off. (applied to DISPENSER MODEL)
DISPENSER MODEL
REFRIGERATOR TEMP
COLDER WARMER
Control range : 32°F ~ 46°F
0°C ~ 8°C
BEST MODEL
REFRIGERATOR TEMP
COLDER WARMER
Control range : 32°F ~ 46°F
0°C ~ 8°C
8-1-2 How to Change the Temperature Mode to °F / °C
1. The setting temperature mode can be changed to °F / °C by pressing and holding COLDER key of Freezer and COLDER
key of Refrigerator over 1 seconds. at the same time.
2. The initial setting is °F. Whenever the mode is changed, the LED lights are changed.
8-1-3 Dispenser Lock
1. Press and hold the DISPENSER LOCK button for 3 seconds to lock the dispenser.
2. When locked, the LED is off and the dispenser function is turned off.
3. Press and hold the DISPENSER LOCK button again for 3 seconds to unlock the dispenser. The LED will be on and the
dispenser will function normally.
DISPENSER
37 °F IS RECOMMENDED
LOCK
37 °F IS RECOMMENDED
EXPRESS
FREEZING
0 °F IS RECOMMENDED
Control range : -6°F ~ 9°F
EXPRESS
FREEZING
0 °F IS RECOMMENDED
Control range : -6°F ~ 9°F
- 24 -
WATER FILTER FREEZER TEMP
RESET COLDER WARMER
-21°C ~ -13°C
FREEZER TEMP
COLDER WARMER
-21°C ~ -13°C