Makita LS1212 Instruction Manual page 17

Slide compound saw 305mm equipped with electric brake

Hide thumbs Also See for LS1212:

*Push the carriage toward the guide

fence fully and tighten the knob to

secure the carriage Secure the work-

piece with the vise Switch on the tool

and wait until the blade attains full

speed before lowering gently into the

cut When the cut is completed, switch

off the tool and WAIT UNTIL THE

BLADE HAS COME TO A COMPLETE

STOP before returning the blade to its

fully elevated position

CAUTION:

Firmly tighten the clamp screw on the turn base

that the carriage will not move dur-

ing operation. Insufficient tightening may cause unexpected kickback of the blade.

Possible serious injury may result.

*Loosen the knob so that the carriage

can be slide freely Pull the carriage

toward you fully Switch on the tool

and wait until the blade attains full

speed Press down the handle and

PUSH THE CARRIAGE TOWARD THE

GUIDE FENCE TO THE WORKPIECE

When the cut is completed, switch off

the tool and WAIT UNTIL THE BLADE

HAS COME TO A COMPLETE STOP

before returning the blade to its fully

elevated position