Clock Setting - First Alert FA1160 User Manual

.Put the unit in direct sunlight, making sure the solar panel of the unit is
2
facing towards the sun. If the sunlight is strong enough, the charging
Indicator will light indicating the unit is charging.
generated the longer you leave the unit in direct sunlight, and the
Radio listening time will be extended (Radio reception only).
Note: If the battery is completely drained (LCD clock display and LED
light do not work), it may require very long exposure to direct sunlight
in order to charge the battery using the solar panel. You should use one
of the other power modes available if you need to use the radio
immediately.
4) USB Power
The unit has a mini USB jack on the back of the unit under the Rubber
Dust Cover.
.Use the mini USB plug side of a 5V DC, 500mA output AC adaptor
1
(not included), and connect it to the USB port on the back of the unit.
.Set the Power Source Selector to "Li-ion Battery" position
2
the AC adaptor into an 120V AC, 60Hz household outlet.
Note: The USB power adaptor (not included) described above is the same
type commonly used with smartphones. A USB to mini USB cord
(not included) is also required for charging the unit via the mini USB jack
located on the back of the unit.
LOW BATTERY INDICATOR
When using battery power to operate this unit and the battery power
becomes weak, the low battery icon
display. You are recommended to charge the rechargeable battery or
replace the exhausted dry cell batteries immediately.
When the unit is in standby mode:
Setting 12/24 Hour format
.Press and hold the MODE button for 2 seconds to enter clock setting
1
mode, 12 hour format (12 Hr) flashing.
.Tap the TUNE
2
format, then press MODE button to confirm. Hour digits flashing to
prompt for input.
Setting Clock
.Tap the TUNE
3
hold the buttons to speed up the forward or reverse scanning of the digits.
Note: Make sure the hour is set so that the AM or PM indicators are
displayed correctly.

CLOCK SETTING

button to select 12 hour (12Hr) or 24 hour (24Hr)
button repeatedly to set the hour value. Press and
8
More power is
will appear & flashing on LCD
and plug