Listening To The Radio/Hd Radio™ Tuner/Siriusxm® Satellite Radio; Selecting A Station; Station Preset Memory - Kenwood KDC-X988 Quick Start Manual

Listening to the radio/HD Radio™ tuner/
SiriusXM® Satellite Radio
[SRC]
[ 1 / 6 ]
Selecting a tuner source
Select "HD RADIO" (KDC-X998,
KDC-BT958HD only)/ "TUNER" (KDC-X898/
KDC-BT858U) or "SiriusXM" (optional
accessory). Refer to <Source selection>
(page 6).
Selecting a band (FM or AM)
(HD Radio tuner / Tuner only)
Press [R].

Selecting a station

Press [E] or [F].
The seek mode can be changed. Refer to
<11-5. Tuner setting>, <12-8. HD Radio
tuner setting>, or <19-20. SiriusXM tuner
setting> in Instruction manual

Station preset memory

1
Press [R] to select a band. (HD Radio
tuner / Tuner only)
2
Press [E] or [F] to select the station
you want to save in the station preset
memory.
3
"HD RADIO"/ "TUNER": Press [1/6].
"SiriusXM": Press [1/6] twice.
Press [1/6] again to enter the Mix
Station preset mode. In this mode,
different bands and tuner sources (Radio,
SiriusXM, HD Radio tuner etc.) can be
saved in the same preset layer, which
8 | Quick Start Guide
[Control] knob
[ E / F ]
[ R ]
allows you to recall a desired station
without switching between bands and/
or tuner sources. Maximum of 6 stations
can be preset in the Mix Station preset
mode.
4
Turn [Control] knob to select preset
number (FM: "1" – "18", AM: "1" – "6",
SiriusXM: "1" – "24"), and then press and
hold [Control] knob.
Recalling the stations/Channel in
the memory
1
Press [R] to select a band. (HD Radio
tuner / Tuner only)
2
"HD RADIO"/ "TUNER": Press [1/6].
"SiriusXM": Press [1/6] twice.
3
Turn [Control] knob to select a preset
number (FM: "1" – "18", AM: "1" – "6",
SiriusXM: "1" – "24"), and then press
[Control] knob.
In the Mix Station preset mode, band
names of tuner sources are displayed as
follows:
FM: FM broadcast station
AM: AM broadcast station
SXM: SiriusXM channel