Table of Contents
Advertisement
VALVE CLEARANCE ADJUSTMENT
3 - 22
Install the camshafts (exhaust and intake),
G
the timing chain and the camshaft caps.
Refer to "CAMSHAFTS" section in the
CHAPTER 4.
Bolt (camshaft cap):
10 Nm (1.0 m • kg, 7.2 ft • lb)
Install the timing chain tensioner.
G
Refer to "CAMSHAFTS" section in the
CHAPTER 4.
NOTE:
Turn the crankshaft counterclockwise sev-
eral turns so that the installed parts settle
into the right position.
Recheck the valve clearance.
G
If the clearance is still incorrect, repeat all
G
the clearance adjustment steps until the
specified clearance is obtained.
6. Install:
All removed parts
G
NOTE:
Install all removed parts in reversed order of
their removal. Note the following points.
INSP
ADJ
Advertisement
Table of Contents
