Kidde RF-SM-DC User Manual page 2

For your convenience, write down the following information. If you call
our Consumer Hotline, these are the first questions you will be asked.
Smoke Alarm Model Number
(located on back of alarm):
Date Code (located on back of alarm).
National Fire Protection Association (NFPA) and the manufacturer
recommends replacing this alarm ten years from the date code:
Date of Purchase:
Where Purchased:
User's Guide
Wireless, Battery-Powered, Single and/or Multiple Station (24 devices maximum, see section
3) Ionization Smoke Alarm with
alarms.
This alarm detects products of combustion using the ionization technique. It contains 0.9
microcurie of Americium 241, a radioactive material (see Section 9). Distributed under U.S.
NRC License No. 32-23858-01E. Manufactured in compliance with U.S. NRC safety criteria in
10 CFR 32.27. The purchaser is exempt from any regulatory requirements. Do not try to
repair the smoke alarm yourself. Refer to the instructions in Section 13 for service.
WARNING! Ionization sensing alarms may detect invisible fire particles (asso-
ciated with fast flaming fires) sooner than photoelectric alarms. Photoelectric
sensing alarms may detect visible fire particles (associated with slow smolder-
ing fires) sooner than ionization alarms. Home fires develop in different
ways and are often unpredictable. For maximum protection, Kidde recom-
mends that both Ionization and Photoelectric alarms be installed.
WARNING! REMOVAL OF THE SMOKE ALARM BATTERIES WILL RENDER THE
SMOKE ALARM INOPERATIVE.
IMPORTANT! READ ALL INSTRUCTIONS BEFORE INSTALLATION AND KEEP THIS
USER'S GUIDE NEAR THE ALARM FOR FUTURE REFERENCE.
This alarm is interconnect compatible with the following alarms and accessories:
• Smoke alarms: RF-SM-ACDC, and RF-SM-DC
• Smoke Sounder: RF-SND (not a UL certified accessory)
See User's Guides for specific application information.
Smart HUSH
Control to temporarily silence nuisance
TM