Fujitsu Eternus Server Connection Manual page 3

This document briefly explains the operations that need to be performed by the user in order to
connect an ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or
ETERNUS8000 model 700, 800, 900, 1100, 1200, 2100, or 2200 Disk storage system to an
Industry Standard server running Windows®.
This document should be used in conjunction with any other applicable user manuals, such as
those for the ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or
ETERNUS8000 model 700, 800, 900, 1100, 1200, 2100, or 2200 Disk storage system, server,
OS used, Fibre Channel cards, drivers, etc.
Note that this manual refers the following documents.
• Server Support Matrix
• ETERNUS Disk storage systems Server Connection Guide (Fibre Channel)
ETERNUS Disk Storage System Settings
• ETERNUS Disk storage systems Server Connection Guide (Fibre Channel)
Fibre Channel Switch Settings
• ETERNUS Disk storage systems Server Connection Guide (Fibre Channel)
for Windows®
-
-
-
-
• ETERNUSmgr Install Guide
• ETERNUSmgr User Guide
Also, note that in this document the ETERNUS2000 models 100 and 200, ETERNUS4000
models 300, 400, 500, and 600, and ETERNUS8000 models 700, 800, 900, 1100, 1200, 2100,
and 2200 Disk storage systems are collectively referred to as ETERNUS Disk storage systems.
P3AM-2922-05ENZ0 ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for Windows®
Driver Settings for PRIMERGY/PRIMEQUEST 1000 Series
Driver Settings for PRIMEQUEST 500/400 Series
Driver Settings for Emulex Fibre Channel Cards
Driver Settings for QLogic Fibre Channel Cards
3
Preface
Fifth Edition
August 2010
Copyright 2010 FUJITSU LIMITED