10
F
unction of each Button
Water temperature button (option)
Use to select water temperature.
Pressing the button allows you to select
Cold
Warm (Hot&Cold)
Cold respectively. Default setting is Cold.
Delay Start (Reservation) button
• Use to set a delayed finishing time.
• The time increases when the button is pushed.
• The following settings are indicated as the button
is pushed 3 4 5 ...11 12 14 16 ...46
48 3 HOUR.
• To cancel delay time, turn the power switch off.
(RES=DELAY)
(refer to 14p)
Note
According to the machine model, figure of control panel may be different.
Water level button
(indication of detergent amount)
• Use to adjust the water level as required. The appropriate
Hot
amount of detergent is shown next to the water level in
the WATER-DETERGENT diagram
• Water level is automatically selected for fuzzy (normal)
and jean programs.
The following settings are indicated as the button is
pushed LARGE
MEDIUM
WARM
COLD
EX-LARGE
LARGE
WATER . DETERGENT
HOT
EX-LARGE
LARGE
MEDIUM
SMALL
Process button
• Use to select SOAK,
WASH, RINSE and
SPIN functions as
desired.
SMALL
DELAY
HOUR
TIME
MIN.
LEFT
DELAY
START