Level III Service Manual
6881038B20
2.
Using a Torx driver with a T-6 bit, remove the 2 screws from the bottom of the
rear housing. See Figure 10.
3.
With the flat end of the disassembly tool, carefully pry the 2 housing catches
inward to release the rear housing.
Figure 10. Removing the rear housing screws and catches
4.
Lift the rear housing away from the front housing to remove as shown in
Figure 11.
DISASSEMBLY TOOL
FRONT HOUSING
Figure 11. Removing the rear housing
May 15, 2001
T-6 TORX BIT
REAR HOUSING SCREW
REAR HOUSING
Disassembly
HOUSING
CATCH
010426o
010427o
21