FLASH.BAT
The FLASH.BAT utility facilitates copying files to and deleting files from flash disk, and
renaming files on the disk. The batch file takes care of switching to write mode on flash disk
and restoring read-only mode after the operation.
Deleting Files from Flash Disk
To delete files, use the command:
FLASH DEL <filename>
For example:
FLASH DEL CS1.CFG
deletes the Spectrum One compatibility layer configuration file, CS1.CFG, from the current
directory of the flash disk, and
FLASH DEL \*.*
deletes all files in the flash disk's root directory.
Note: There is no mention of the E: drive in the command
Spectrum24 Network and Flash Disk Utilities
E-19