How To Configure And Use Logs - Linksys WRT 1900AC User Manual

To check whether an address can be reached:
• Under Ping IPv4, enter an IP address or URL into the IP or host name field.
• Select a number of times to ping from the Number to ping drop-down list.
• Click Start to Ping. A window will open showing the ping test results. You will see
a response for each successful ping.
Notes:
If an Internet URL fails to respond to ping, it doesn't necessarily mean that the
site is down. For security reasons, some sites are configured to not respond to
ping requests.
To trace the route that packets take between your router and a specific
address:
• Under Trace route, enter an address in the IP or host name field.
• Click Start to Trace route. A window will open with the test results.
WRT 1900AC | Maintaining and Monitoring

HOW TO CONFIGURE AND USE LOGS

Your router can track all traffic for your Internet connection and record that
information in a log.
To enable and view logs, do the following:
• Log in to Linksys Smart Wi-Fi. (See "How to connect to Linksys Smart Wi-Fi" on
page 7.)
• Under Router Settings, click Troubleshooting.
• Click the Logs tab.
• To enable logs, click the Enable Logs button so that ON is displayed.
• You can view the logs directly in the list, open the logs in a separate browser
window, or print the logs.
45