Software in object form solely with the Equipment for which the Software was intended. This Product may integrate programs, licensed to Mitel by third party Suppliers, for distribution under the terms of this agreement. These programs are confidential and proprietary, and are protected as such by copyright law as unpublished works and by international treaties to the fullest extent under the applicable law of the jurisdiction of the Customer.
QWERTY, QWERTZ, and AZERTY versions available About This Guide This manual describes how to physically install your K680i Detachable Magnetic Keyboard to your 6867i or 6869i IP phone. Contact your system administrator if you have any additional questions with regards to the K680i Detachable Magnetic Keyboard or your 6867i/6869i IP phone.
K680i Parts When you unpack the K680i Detachable Magnetic Keyboard package, you should ensure that you have all of the following items. If any part is missing, contact the supplier of your phone. & Backspace Enter Caps Lock “ ‘...
Installation You can install the K680i Detachable Magnetic Keyboard by simply using the strength of the magnets to quickly attach and detach the keyboard to your phone when required or you can utilize the locking bar on the phone-to-keyboard magnetic connector and included screw to attach the keyboard to the phone in a more secure manner.
Installation Insert the phone-to-keyboard magnetic connector into the area left vacant by the removal of the rubber cap. Note: The magnetic connector should be installed with the visible surfaces of neodymium magnets facing towards the bottom of the phone. Option A - Magnet-Only Connection Follow the procedures below if you plan on using the keyboard infrequently and/or want to be able to quickly store the keyboard away when not in use: Swing the locking bar of the magnetic connector towards the phone so it rests on back of the phone.
Page 8
Installation Position your phone back on your desk and slide the K680i Detachable Magnetic Keyboard towards the magnetic connector until the keyboard snaps into place. Notes: • When the keyboard is connected the phone automatically detects the keyboard and the connection status LED on the keyboard will light up green indicating it is ready to be used.
Swing the locking bar of the magnetic connector towards the front of the phone until it clicks in place. Position your phone back on your desk and, with the bottom of the phone slightly raised, slide the K680i Detachable Magnetic Keyboard connection pins in between the base of the phone and the locking bar.
Page 10
Position your phone back on your desk and ensure the connection status LED on the keyboard is lit green. You are now ready to use your K680i Detachable Magnetic Keyboard. 41-001519-00 REV00 – 10.2014...
(1) year period from the date of original purchase (“Warranty Period”). If there is a defect or malfunction, Mitel shall, at its option, and as the exclusive remedy, either repair or replace the prod- uct at no charge, if returned within the Warranty Period.
Part 5-4 of Schedule 2 to the Competition and Consumer Act 2010 (the ACL), the exercise of a right conferred by such a provision or any liability of Mitel in relation to a failure to comply with a guarantee that applies under Division 1 of Part 3-2 of the ACL to a supply of goods or services.
Mitel in relation to a failure to comply with a guarantee that applies under Division 1 of Part 3-2 of the ACL to a supply of goods or services.
Page 14
While every effort has been made to ensure accuracy, Mitel will not be liable for technical or editorial errors or omissions contained within this documentation. The information contained in this documentation is subject to change without notice.