Panasonic TH-50LFC70U Operating Instructions Manual page 25

For 80 inch model
Remote control
sensor
Enter / Aspect button
(see page 25, 34)
Volume Adjustment
ENTER/
Volume Up "+" Down "–"
When the menu screen is displayed:
+
/
"+" : press to move the cursor up
VOL
"–" : press to move the cursor down
-
/
(see page 34)
MENU Screen ON / OFF
MENU
Each time the MENU button is pressed, the menu screen will switch.
(see page 34)
INPUT
INPUT button (INPUT signal selection)
(see page 21)
Main Power On / Off Switch
Power Indicator
The Power Indicator will light.
• Power-OFF .... Indicator not illuminated (The unit will still
consume some power as long as the power
cord is still inserted into the wall outlet.)
• Standby ........ Red
Orange (When "Slot power" is set to "On" and
Terminal Board is installed. See page 60)
Orange (Depending on the type of the function board
installed, when the power is supplied to the slot)
Orange (When "Control I/F Select" is set to
"DIGITAL LINK/LAN" or "Wireless Network
Standby" is set to "On". Refer to "Operating
Instructions, Network Operations")
• Power-ON ...... Green
• HDMI1 Power management
HDMI2 Power management
......................... Orange (With HDMI1 or HDMI2 input signal. See page 49)
* These functions are not supported by TH-80LFC70E.
• PC Power management (DPMS)
......................... Orange (With PC input signal. See page 49)
• DVI-D Power management
......................... Orange (With DVI input signal. See page 49)
Note:
If the power indicator is orange, power consumption during standby
is generally larger than that of when the power indicator is red.
Brightness Sensor
Detects the brightness in the viewing environment. (see page 49)
USB (VIEWER): Connect to USB memory. (see page 29)
SLOT: Terminal board (optional accessories) insert
slot (see page 4 )
Note:
The upper side slot is for terminal board with 2-slot
width. The terminal board with 1-slot width does not
function when installed in the upper side slot.
Basic Controls
23