Darning With Wool Thread - Pfaff 1213 Instruction Book

Darning with
wool
thread
Ultra-Matic stitch selector:
zigzag stitch in stitch range
6 or 7.
Drop the machine feed.
Attach darning foot
No. 93-040 960-91.
Knitted garments and articles made of terry
cloth are best darned with wool thread since
spots darned with this thread are not as stiff
as those darned with thin embroidery and
darning thread.
Draw the wool thread through the needle
hole of the darning foot and into the slot of
this foot. The wool thread must be placed
under the darning foot (ill, right).
Run the machine and place the wool thread
back and forth across the hole, packing the
individual strands closely together. Stitch it
down on the right and left of the defective
area. Once the hole is covered with the wool
thread, trim it. Then sew back and forth over
the darned area lengthwise, using a thin
darning thread. Do not space the various
lines of stitching too closely since this would
make the darn too hard.
44