Securing The Mount - Pioneer PDWB-5003 Installation Manual

Securing the mount

Step 5
Warning: The plasma display is heavy and 2 people are needed to lift and install it. Failure to do so could result in serious personal injury.
Before placing the plasma on the wall recheck all hardware for proper tightness and security. Before installing, become familiar with the way the plasma mount attaches to the wall
mount. Align the four (4) tab openings to the four (4) receiving tabs on the flat back plate. When all four (4) the tabs are aligned slide the plasma down, right and down again to lock the
mounts together. Make sure all (4) tab openings are interlocked with the receiving tabs before letting go of the plasma. See fig 5.
Caution: The plasma display is heavy and 2 people are needed to lift and
install it. Failure to do so could result in serious personal injury.
Mounting
bracket
(4) Tab
openings
Plasma display
Flat back plate
Wall structure
Caution: All four (4) receiving tab openings from the
mounting bracket must be locked to the tabs found on
the flat back plate before letting go of the plasma
display. See the diagram on the left to see the
interlocked tab.
Locked tab
Align all four (4) tab
openings to the flat
back plate receiving
tabs and push the
plasma as shown on
arrows to lock in place
(4) Securing
tabs
Wall structure
Plasma display
9