Battery Installation - GE RM24961 Instruction Manual

ENTER
Shows teh TV's channel/time display.The
ENTER button is used to complete channel
selection for some brands of TV. It is also
used to complete the code entry process.
VOL & CHAN
The VOL (Volume) and CH (Channel) buttons
increase or decrease channel numbers or
volume.
MUTE
To MUTE the volume on the TV.
PREV CHAN
PREV CHAN allows you to go to the previ-
ous channel you selected. Operates the
same as Last Channel, Go Back or Recall
button on your original remote.
0-9
The number buttons operate the same as on
your original remote, and are used for enter-
ing device codes or channel numbers.
MENU
The MENU button calls up the TV and DBS
set up menus.
Navigation Buttons and OK
Used to move through on-screen menuing
and guides and to select menu options.
CLEAR
Removes the on-screen display or program
guide to return to normal viewing.

Battery Installation

Your Universal Remote requires two (2)
new AAA alkaline batteries. To install the
batteries:
1. On the back of the remote, push and
slide the cover off.
2. Match the batteries to the + and -
marks inside the battery case, then
insert the batteries.
3. Press and slide the battery cover back
into place.
Note: Programmed codes will remain in
memory for a short period of time allow-
ing for battery replacement. If batteries
have been dead for a prolonged period of
time, reprogramming may be required.
2