JVC AV-32360 Service Manual page 17

BASIC OPERATION OF SERVICE MENU
1. TOOL OF SERVICE MENU OPERATION
Operate the SERVICE MENU with the REMOTE CONTROL UNIT.
2. SERVICE MENU ITEMS
With the SERVICE MENU, various adjustments can be made, and they are broadly classified in the following items of adjustments.
(1) V/C(S) ･･･････ ･････････････ ････････････ VIDEO / CHROMA related circuit adjustment mode
(2) DEFLECTION(D) ･･･････ ･････････････ ･･ DEFLECTION related circuit adjustment mode
(3) SOUND(A) ･･･････ ･････････････ ････････ SOUND related circuit adjustment mode
(4) OTHERS(F) ･･･････ ･････････････ ･･･････ Whole system related items adjustment mode
(5) PIP(PIP)[Only for AV-36360, 36S36] ･････ PIP related c ircuit adjustment mode
(6) 3L Y/C(LYC) ･･･････ ･････････････ ･･････ 3 line YC separation related circuit adjustment mode
(7) LOW LIGHT ･･･････ ･････････････ ･･･････ White balance of "LOW LIGHT " adjustment mode
(8) HIGH LIGHT ･･･････ ･････････････ ･･････ White balance of "HIGH LIGHT" adjustment mode
(9) RF AFC･･･････ ･････････････ ･･･････････ RF AFC related circuit adjustment mode
(10) VCO ･･･････ ･････････････ ････････････ ･ VCO related circuit adjustment mode
2
(11) I C BUS ･･･････ ･････････････ ･･････････ I
(12) SYSTEM(SYS) ･･･････ ･････････････ ････ This mode is used when s etting up the whole s ys tem.
BASIC OPERATION OF SERVICE MENU
(1) Ho w to enter SERVICE MENU
Press the SLEEP TIMER key and set the SLEEP TIMER for
[0 MIN].
Then press the DISPLAY key and the VIDEO STAT US key of the
remote control unit simultaneously, and the SERVICE MENU
screen will be displayed as shown below.
(2) Selection of SUB MENU SCREEN
In SERVICE MENU, press the CURSOR ▲ ▲ ▲ ▲ /▼ ▼ ▼ ▼ key to select any of
the SUB MENU items. (The letters of the selected items are
displayed in yellow)
If an item like to set up bec omes yellow, the CURSOR
will be pushed and it will go into the mode.
SERVICE M ENU
1.V/C(S)
3.SOUND(A)
5.PIP(PIP)
7.LOW LIGHT
9.RF AFC
2
11.I C BUS
SELECT BY
OPERATE BY
CURSOR ▲/▼ key
Select 1.V/C(S) ～ 12.SYSTEM(SYS)
1.V/C(S)
2.DEF (D)
2
11.I C BUS
12.SYSTEM(SYS)
2
C bus related circuit adjustment mode [Fixed on]
2.DEF(D)
4.OTHERS
6.3L Y/C(LYC)
8.HIGH LIGHT
10.VCO
12.SYSTEM (SYS)
EXIT BY EXIT
SERVICE MENU
CURSOR
Go into eac h SUB MENU
KEY ASSIGNMENT OF REMOTE CONTROL UNIT
①
Setting for "0 min"
②
Simultaneously push
/ key
③
Go into the item
④
Setting the value
Although this illus tration of remote c ontrol unit is written about
RM-C254 (AV-36360), it c an use for operating the other model
of remote control unit as same key assignment.
/ key
No. 51950
AV-36360 AV-36S36
AV-36330 AV-36S33
③, ④
EXIT
Select the item
VIDEO/C HROMA
DEFLECTION
SOUND
AV-36320
17