Sony VPL-FE100U Operating Instructions Manual page 38

Specifications
VD: Vertical sync: 0.6–8 Vp-p,
high impedance, sync positive/
negative
AUDIO IN: Phono type (stereo)
500 m Vrms, impedance more
than 47 kilohms
HDTV/DTV (YP
Y: 1 Vp-p ± 2dB positive,
75 ohms terminated
Tri-level sync: ± 0.3 Vp-p
Bi-level sync: 0.3 Vp-p
P /P
B
75 ohms terminated
HDTV/DTV (GBR): BNC type
G with sync: 1 Vp-p ± 2 dB,
75 ohms terminated
Tri-level sync: ± 0.3 Vp-p
Bi-level sync: 0.3 Vp-p
B/R: 0.7 Vp-p ± 2dB positive,
75 ohms terminated
(For HDTV/DTV signals see
"Acceptable HDTV/DTV
signals" on page 39 (GB).)
AUDIO OUT (variable out)
Phono type, Max. 1 Vrms
When input is 500 mVrms:
impedance less than 5 kilohms
Safety regulations
VPL-FE100U: UL1950, CSA No.
950 (c-UL), FCC Class A, IC
Class A
VPL-FE100E/FE100M: EN60 950
(TÜV), CE, C-Tick
General
562 × 237 × 649 mm (22
Dimensions
× 25
Mass Approx. 34.5 kg (76 lb 1 oz)
(excluding the optional lens)
Power requirements
VPL-FE100U: AC 100 to 120 V/
220 to 240 V, 50/60 Hz
VPL-FE100E/FE100M: AC 220 to
240 V, 50/60 Hz
Power consumption
Approx. 770 W (Standby mode:
15W for VPL-FE100U, 20 W for
VPL-FE100E/FE100M)
Heat dissipation 2628 BTU
Operating temperature
0°C to 40°C (32°F to 104°F)
...........................................................................................................................................................................................................
1) UL listed for 120 V operation.
38
(GB)
P ): BNC type
B R
: 0.35 Vp-p ± 2dB positive,
R
× 9
1 3
/
4
5
/ inches) (w/h/d)
8
1)
Operating humidity
Storage temperature
Storage humidity 10% to 90%
Supplied Accessories
Design and specifications are subject to change
without notice.
Optional accessories
Projector Lamp LMP-Q120 (for replacement)
Projector Lamp LMP-S120 (for replacement)
Interface Board
IFB-12A (Analog RGB/component/HDTV/
composite video/S video input with 5BNC type
connectors)
IFB-20 (Analog RGB input with D-sub 9-pin type
connector)
IFB-21 (Analog RGB input/output with HD D-sub
15-pin type connector)
IFB-30 (Digital RGB input with D-sub 9-pin type
connector)
IFB-50 (serial digital video input/output with BNC
/
8
type connector)
IFB-1000 (Composite video input with BNC type
connector/S video input with mini DIN 4-pin
type connector)
IFB-X2000E (Composite video input with phono
jacks/S video input with mini DIN 4-pin type
connector) (only for VPL-FE100E)
Signal Interface Switcher PC-3000
Interface Unit IFU-1271/1271M
SIC Cable
SIC-10/20A/20C/21/22/23/24/24A/25/26/26A/30/
31/M1/M5/M15/M25/M50
9-pin remote cable (for PJ COM)
RCC-5G/10G/30G
35% to 85% (no condensation)
–20°C to +60°C (–4°F to +140°F)
Remote Commander RM-PJ1001 (1)
Size AA (R6) batteries (3)
Remote commander cable (stereo)
(15 m) (1)
AC power cord (1)
Terminator for the PJ COM
connector (1)
Lens ring (1)
Operating Instructions (1)
Installation Manual for Dealers (1)
Warranty (only for VPL-FE100U)
(1)