Sony α SLT-A58 Instruction Manual page 241

1
on the control button t
(Bracket: Cont.) or
(Single Bracket) t Select
the desired bracket step
• _EV displayed with
currently selected value.
2
Adjust the focus and shoot the subject.
The base exposure is set at the first shot in the bracket.
• Press and hold the shutter button until recording stops when [Bracket:
Cont.] is selected.
• Press the shutter button shot by shot when [Single Bracket] is selected.
Notes
• When the mode dial is set to M and [ISO] is set to other than [AUTO], the exposure
is shifted by adjusting the shutter speed. When [ISO] is set to [AUTO], the camera
changes the ISO sensitivity and adjusts the exposure value.
• When you adjust the exposure, the exposure is shifted based on the compensated
value.
• Bracket cannot be used when the exposure mode is set to [Intelligent Auto],
[Superior Auto], [Tele-zoom Cont. Priority AE], [Sweep Panorama], or [Scene
Selection].
• When using the flash, the camera shifts the amount of flash light using flash bracket
shooting. Press the shutter button shot by shot even when [Bracket: Cont.] is
selected.
is the
Selecting the drive mode
145