Table of Contents
Advertisement
Crestron DM-TX-201-C
Operations & Installation Guide – DOC. 6958B
5. The DM OUT port consists of one RJ-45 connector. Refer to the following table for the
connector pinouts.
DM OUT Connector Pinouts
PIN #
WIRE COLOR
1
Orange/White
2
Orange
3
Green/White
4
Blue
6. Power over DM requires connection to a DM 8G+ power sourcing device.
7. For DM 8G+ wiring up to 330 feet (100 meters) between devices, use Crestron DM-CBL-8G
DigitalMedia 8G cable, Crestron DM-CBL DigitalMedia cable, Crestron DM-CBL-D DigitalMedia D
cable, or generic CAT5e (or better) UTP or STP. Shielded cable and connectors are recommended to
safeguard against unpredictable environmental electrical noise which may impact performance at
resolutions above 1080p. Refer to the latest version of the Crestron DigitalMedia Infrastructure Guide
(Doc. 4556) for complete wiring guidelines and to the Crestron DigitalMedia Design Guide (Doc.
4789) for complete system design guidelines. All cable sold separately.
DigitalMedia 8G+™ Transmitter 201: DM-TX-201-C • 13
DigitalMedia 8G+™ Transmitter 201
1
8
PIN #
WIRE COLOR
5
Blue/White
6
Green
7
Brown/White
8
Brown
Hide quick links:
Advertisement
Table of Contents
