Panasonic CQ-VX100U Installation Instructions Manual page 21

Connection with Rear View Camera
Note:
¡ Refer to the operating instructions for the connected devices, in addition.
¡ CY-RC50KU is not available as a background camera.
!0 Power
Connector
Reverse Lead
(Violet/white stripe)
Connecting the Reverse Lead
If using an optional rear view camera, the reverse lead
must be connected.
Connect the reverse lead (violet/white stripe) to the posi-
tive (+) lead of the reverse lamp (the lamp with a clear
lens that lights when the transmission gear is shifted into
the reverse position).
Note:
¡Connect the reverse lead after cutting the terminal at
the end.
¡Use a Reverse Extension Cord (option) if needed.
CQ-VX100U
(Rear)
Rear View Camera
(CY-RC50KU)
CAMERA IN
Camera Input Terminal
(Yellow)
Reverse lamp
Rear View Camera
Control Unit
Camera Input
(Option)
RCA Cord
(Option)
(Video)
(Yellow)
Clip connector
(From car accessories
stores)
(Option)
(Video)
(Yellow)
Battery
Car chassis
P
R
Transmission gear
N
D
2
L
Check the reverse lamp.
Take it out of the back of
the tail lamp mount.
CQ-VX100U
20
21