Lenovo ThinkStation P300 User Manual
  1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Desktop
  5. ThinkStation P300
  6. User manual
Lenovo ThinkStation P300 User Manual

Lenovo ThinkStation P300 User Manual

Hide thumbs Also See for ThinkStation P300:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Hardware Maintenance Manual, Setup Manual
ThinkStation P300
User Guide
Machine Types: 10DA, 30AG, and 30AH

Advertisement

Table of Contents
loading

Related Manuals for Lenovo ThinkStation P300

Summary of Contents for Lenovo ThinkStation P300

  • Page 1 ThinkStation P300 User Guide Machine Types: 10DA, 30AG, and 30AH...
  • Page 2 Important safety information” on page v and Appendix E “Notices” on page 15. Fourth Edition (April 2015) © Copyright Lenovo 2014, 2015. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration...

  • Page 3: Table Of Contents

    Using BIOS passwords ..Enabling or disabling a device ..An introduction to Lenovo programs ..Selecting a startup device ..
  • Page 4 Safety and Warranty... Creating and using recovery media ..Lenovo Web site ... . Performing backup and recovery operations .
  • Page 5 Battery recycling information for Taiwan ..Battery recycling information for the European Union ....© Copyright Lenovo 2014, 2015...
  • Page 6 ThinkStation P300 User Guide...

  • Page 7: Read This First: Important Safety Information

    ® Format (PDF) version from the Lenovo Support Web site at http://www.lenovo.com/UserManuals. The Lenovo Support Web site also provides the Safety, Warranty, and Setup Guide and this User Guide in additional languages. Service and upgrades Do not attempt to service a product yourself unless instructed to do so by the Customer Support Center or your documentation.

  • Page 8: Power Cords And Power Adapters

    Never overload these devices. If power strips are used, the load should not exceed the power strip input rating. Consult an electrician for more information if you have questions about power loads, power requirements, and input ratings. ThinkStation P300 User Guide...

  • Page 9: Polyvinyl Chloride (Pvc) Cable And Cord Notice

    Extended contact with the body could cause discomfort or, potentially, a skin burn. • Do not charge the battery or operate your computer, power adapter, or accessories near flammable materials or in explosive environments. © Copyright Lenovo 2014, 2015...

  • Page 10: Operating Environment

    Do not eat or smoke over your keyboard. Particles that fall into your keyboard can cause damage. Laser compliance statement CAUTION: When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or transmitters) are installed, note the following: viii ThinkStation P300 User Guide...

  • Page 11: Power Supply Statement

    Do not spray any liquid detergent directly on the computer or use any detergent containing flammable material to clean the computer. Spray the detergent on a soft cloth and then wipe the computer surfaces. © Copyright Lenovo 2014, 2015...
  • Page 12 ThinkStation P300 User Guide...

  • Page 13: Chapter 1. Product Overview

    • Locations of parts on the system board • Locations of internal drives • Computer features • Software programs provided by Lenovo Locations This section provides the following topics: • “Locating connectors, controls, and indicators on the front of your computer” on page 2 •...

  • Page 14: Locating Connectors, Controls, And Indicators On The Front Of Your Computer

    Figure 1. Front connector, control, and indicator locations Optical drive eject/close button USB 3.0 connectors (2) Hard disk drive activity indicator Power indicator Power button Microphone connector Headphone connector Card-reader slot (available on some models) ThinkStation P300 User Guide...

  • Page 15: Locating Connectors On The Rear Of Your Computer

    Locating connectors on the rear of your computer The following illustration shows the locations of the connectors on the rear of your computer. Some connectors on the rear of your computer are color-coded to help you determine where to connect the cables on your computer.
  • Page 16 USB mouse, a USB scanner or a USB printer. If you have more than eight USB devices, you can purchase a USB hub, which you can use to connect additional USB devices. VGA connector Used to attach a VGA monitor or other devices that use a VGA connector. ThinkStation P300 User Guide...

  • Page 17: Locating Components

    Locating components The following illustration shows the locations of the various components in your computer. To remove the computer cover, see “Removing the computer cover” on page 71. Figure 3. Component locations Heat sink and fan assembly Memory module Optical drive (available on some models) Card reader (available on some models) Front audio and USB assembly Front bezel...

  • Page 18: Locating Parts On The System Board

    PCI Express x16 card slot (negotiable link width x4, x1) PCI Express x1 card slot PCI Express x16 graphics card slot (graphics card available on some models) System fan connector Cover presence switch connector (intrusion switch connector) ThinkStation P300 User Guide...

  • Page 19: Locating Internal Drives

    Locating internal drives Internal drives are devices that your computer uses to read and store data. You can add drives to your computer to increase storage capacity and enable your computer to read other types of media. Internal drives are installed in bays. When installing or replacing an internal drive, it is important to note the type and size of the drive that you can install or replace in each bay and correctly connect the cables to the drive installed.

  • Page 20: Machine Type And Model Label

    Machine type and model label The machine type and model label identifies your computer. When you contact Lenovo for help, the machine type and model information helps support technicians to identify your computer and provide faster service. The following is a sample of the machine type and model label.
  • Page 21 • On the Microsoft Windows 8.1 operating system, go to the desktop and move your pointer to the top-right or bottom-right corner of the screen to display the charms. Then click Settings ➙ PC info to view the information. For more information, see “Installing or replacing a memory module” on page 76. Internal drives •...
  • Page 22 RAID 10 arrays on specific Intel chipset system boards to enhance hard disk performance. • Preboot Execution Environment (PXE) The Preboot Execution Environment is an environment to start computers using a network interface independent of data storage devices (such as the hard disk drive) or installed operating systems. ThinkStation P300 User Guide...
  • Page 23 • Intelligent Cooling Engine (ICE) The Intelligent Cooling Engine is a system thermal management solution that enables your computer to run with better thermal and acoustic performance. The ICE function also monitors the thermal performance of your computer to identify thermal problems. For more information, see “ICE performance mode”...

  • Page 24: Specifications

    The operating system(s) listed here are being certified or tested for compatibility at the time this publication goes to press. Additional operating systems might be identified by Lenovo as compatible with your computer following the publication of this manual. This list is subject to change. To determine if an operating system has been certified or tested for compatibility, check the Web site of the operating system vendor.

  • Page 25: Accessing Lenovo Programs On The Windows 8.1 Operating System

    You can find the program by its program name or icon name as shown in the Lenovo programs available on the Windows 7 operating system table. ® Note: If you do not find the program you need, open the Lenovo ThinkVantage Tools program to find the dimmed icon for the program.

  • Page 26: An Introduction To Lenovo Programs

    As a result, you can access, edit, and share your files from anywhere. With Lenovo Reach, you also can add your favorite Web services to your cloud desktop and stay logged-in to Web sites with the cloud password manager.
  • Page 27 The Lenovo ThinkVantage Tools program provides easy access to various tools to help you work more easily and securely. • Lenovo Tools The Lenovo Tools program guides you to a host of information sources and provides easy access to various tools to help you work more easily and securely. • Recovery Media The Recovery Media program enables you to restore the contents of the hard disk drive to the factory-default settings.
  • Page 28 ThinkStation P300 User Guide...

  • Page 29: Chapter 2. Using Your Computer

    When you register your computer, information is entered into a database, which enables Lenovo to contact you in case of a recall or other severe problem. After you register your computer with Lenovo, you will receive quicker service when you call Lenovo for help. In addition, some locations offer extended privileges and services to registered users.

  • Page 30: Using The Wheel Mouse

    If the volume icon is not on the taskbar, add the volume icon to the taskbar. To add the volume icon, do the following: • For Windows 7: 1. From the Windows desktop, click Start ➙ Control Panel ➙ Appearance and Personalization. 2. In the Taskbar and Start Menu section, click Customize icons on the taskbar. ThinkStation P300 User Guide...

  • Page 31: Setting The Volume From Control Panel

    3. Click Turn system icons on or off and change the volume behaviors from Off to On. 4. Click OK to save the new settings. • For Windows 8.1: 1. Open Control Panel, and click Appearance and Personalization. Note: For detailed information on how to open Control Panel on Windows 8.1, see “Accessing Control Panel on the Windows 8.1 operating system”...

  • Page 32: Handling And Storing A Disc

    If your computer is installed with a recordable optical drive, you can use the drive to record a disc. To record a disc, do the following: • On the Windows 7 operating system, use either the Corel DVD MovieFactory Lenovo Edition program or the Power2Go program installed on your computer.

  • Page 33: Navigating Among Screens On The Windows 8.1 Operating System

    1. On the Start screen, click the down arrow in the bottom-left corner to go to the Apps screen. Then type Power2Go in the search box in the top-right corner of the screen. 2. Click Power2Go in the search result to open the program. 3.

  • Page 34: Accessing Control Panel On The Windows 8.1 Operating System

    For the answers to more frequently asked questions about using your computer, go to: http://www.lenovo.com/support/faq How can I get my user guide in another language? The user guide is available in various languages at: http://www.lenovo.com/UserManuals ThinkStation P300 User Guide...
  • Page 35 Chapter 8 “Recovery information” on page 63. Additionally, in case of a hard-disk-drive failure, you can order a recovery disc set from the Lenovo Customer Support Center. For information about contacting the Customer Support Center, see Chapter 10 “Getting information, help, and service”...
  • Page 36 ThinkStation P300 User Guide...

  • Page 37: Chapter 3. You And Your Computer

    51 to 61 cm (20 to 24 inches), and position it so you can view it without having to twist your body. Also, position other equipment you use regularly, such as the telephone or a mouse, within easy reach. © Copyright Lenovo 2014, 2015...

  • Page 38: Glare And Lighting

    For more information about power cords, see “Power cords and power adapters” on page vi. Accessibility information Lenovo is committed to providing people with disabilities greater access to information and technology. Some technologies are already provided in your operating system. Others can be purchased through vendors.
  • Page 39 select one object with your keyboard, the object is highlighted. When you move the pointer to one object with your mouse, the introductory text of the object is displayed. To use on-screen notification, open Control Panel, click Ease of Access ➙ Ease of Access Center, and then click Use text or visual alternatives for sounds.
  • Page 40 Note: Setting too low of a resolution might prevent some items from fitting on the screen. For alternatives on increasing the size of text and other objects, see the following: • “Customizable text size” on page 28 • “Magnifier” on page 28 • “Zoom” on page 28 ThinkStation P300 User Guide...
  • Page 41 Ease of Access keyboard shortcuts The following table contains keyboard shortcuts that can help make your computer easier to use. Keyboard shortcut Function Windows logo key + U Open the Ease of Access Center Right Shift for eight seconds Turn Filter Keys on or off Shift five times Turn Sticky Keys on or off Num Lock for five seconds...

  • Page 42: Moving Your Computer To Another Country Or Region

    Documentation in accessible formats Lenovo provides electronic documentation in accessible formats. Lenovo electronic documentation, such as properly tagged PDF files or HyperText Markup Language (HTML) files, is developed to ensure that visually impaired users can read the documentation through a screen reader. Each image in the documentation also includes adequate alternative text to explain the image so that visually impaired users can understand the image when they use a screen reader.

  • Page 43: Chapter 4. Security

    Locking the computer cover helps prevent unauthorized people from gaining access to the inside of your computer. Your computer comes with a padlock loop so that the computer cover cannot be removed when a padlock is installed. Figure 7. Installing a padlock © Copyright Lenovo 2014, 2015...

  • Page 44: Attaching A Kensington-Style Cable Lock

    The cable lock also locks the buttons used to open the computer cover. This is the same type of lock used with many notebook computers. You can order such a cable lock directly from Lenovo by searching for Kensington at: http://www.lenovo.com/support Figure 8.

  • Page 45: Attaching A Cable Lock

    Attaching a cable lock A cable lock can be used to secure devices, such as the keyboard and the mouse, by locking the device cables to your computer. The cable lock attaches to the cable-lock slots on the rear of your computer. See “Locating connectors on the rear of your computer”...

  • Page 46: Windows Passwords

    To open Fingerprint Manager Pro or ThinkVantage Fingerprint Software and use the fingerprint reader, do the following: • On the Windows 7 operating system, see “Accessing Lenovo programs on the Windows 7 operating system” on page 12. • On the Windows 8.1 operating system, see “Accessing Lenovo programs on the Windows 8.1 operating system”...

  • Page 47: Using And Understanding Firewalls

    Your computer is preinstalled with an antivirus program to help you guard against, detect, and eliminate viruses. Lenovo provides a full version of antivirus software on your computer with a free 30-day subscription. After 30 days, you must renew the license to continue receiving the antivirus software updates.
  • Page 48 ThinkStation P300 User Guide...

  • Page 49: Chapter 5. Advanced Configuration

    The Setup Utility program menu lists various items about the system configuration. To view or change settings, start the Setup Utility program. See “Starting the Setup Utility program” on page 37. Then, follow the instructions on the screen. © Copyright Lenovo 2014, 2015...

  • Page 50: Using Bios Passwords

    • Contain at least one alphabetic character and one numeric character • Not be your name or your user name • Not be a common word or a common name • Be significantly different from your previous passwords ThinkStation P300 User Guide...

  • Page 51: Enabling Or Disabling A Device

    Setting, changing, and deleting a password To set, change, or delete a password, do the following: 1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 37. 2. From the Setup Utility program main menu, select Security. 3.

  • Page 52: Selecting A Startup Device

    42. Enabling ErP LPS compliance mode Lenovo computers meet the eco-design requirements of the ErP Lot 3 regulation. For more information, go http://www.lenovo.com/ecodeclaration You can enable ErP LPS compliance mode in the Setup Utility program to reduce the consumption of electricity when your computer is off or in sleep mode.

  • Page 53: Ice Performance Mode

    • Press the power button • Enable the wake up on alarm feature The wake up on alarm feature enables your computer to wake up at a set time. To enable the wake up on alarm feature, do the following: 1.

  • Page 54: Exiting The Setup Utility Program

    Setup Utility program. Updating or recovering the BIOS Lenovo might make changes and enhancements to the BIOS. When updates are released, they are available as downloadable files on the Lenovo Web site at http://www.lenovo.com/drivers. Instructions for using the BIOS updates are available in a TXT file that is included with the update files.

  • Page 55: Updating The Bios From A Disc

    Note: You can download a self-starting bootable disc image (known as an ISO image) with the system program updates to create a system-program-update disc. Go to: http://www.lenovo.com/support To update the BIOS from a disc on the Windows 8.1 (64-bit) operating system, do the following: 1.

  • Page 56: Updating The Bios From Your Operating System

    Updating the BIOS from your operating system Lenovo makes constant improvements to its Web sites. The Web page contents are subject to change without notice, including the contents referenced in the following procedure. To update the BIOS from your operating system, do the following: 1.

  • Page 57: Configuring The System Bios To Enable Sata Raid Functionality

    • RAID Level 0 – Striped disk array – Two hard disk drives minimum – Better performance without fault tolerance • RAID Level 1 – Mirrored disk array – Two hard disk drives minimum – Improved read performance and 100% redundancy To install a secondary hard disk drive, refer to “Replacing the secondary hard disk drive”...

  • Page 58: Resetting Disks To Non-Raid

    • See “Deleting RAID volumes” on page 45 for RAID volume deletion. • See “Creating RAID volumes” on page 45 for RAID volume creation. • Use the up and down arrow keys to select Exit and press Enter. ThinkStation P300 User Guide...

  • Page 59: Chapter 6. Preventing Problems

    This section explains how to get the latest updates for your computer. Getting the latest device drivers for your computer Note: Lenovo makes constant improvements to its Web sites. The contents on the Web page are subject to change without notice, including the contents referenced in the following procedure.

  • Page 60: Using System Update

    To open System Update, see “Accessing Lenovo programs on the Windows 7 operating system” on page 12 or “Accessing Lenovo programs on the Windows 8.1 operating system” on page 13. If System Update is not currently installed on your computer, you can download it from the Lenovo Support Web site at: http://www.lenovo.com/support...

  • Page 61: Optical Mouse

    2. Wipe each keytop surface with the cloth. Wipe the keys one by one; if you wipe several keys at a time, the cloth may hook onto an adjacent key and possibly damage it. Ensure that no liquid drips onto or between the keys.

  • Page 62: Moving Your Computer

    A log book can help you or a Lenovo technician determine if a problem is related to change in hardware, change in software, or some other action that might have taken place.

  • Page 63: Chapter 7. Troubleshooting And Diagnostics

    Note: If you cannot correct the problem, have the computer serviced. For a list of service and support telephone numbers, refer to the Safety, Warranty, and Setup Guide that comes with your computer or go to the Lenovo Support Web site at: http://www.lenovo.com/support/phone...

  • Page 64: Troubleshooting Procedure

    If this does not correct the problem, continue with the next step. 6. Run the diagnostic program. See “Lenovo Solution Center” on page 61 for more information. • If the diagnostic program detects a hardware failure or if you are unable to run the diagnostic program, contact the Lenovo Customer Support Center.

  • Page 65: Audio Problems

    1. Remove the new hardware option or software. If you must remove the computer cover to remove a hardware option, ensure that you review and follow the electrical safety information provided with your computer. For your safety, do not operate the computer with the cover removed. 2.

  • Page 66: Dvd Problems

    Playback is slow or choppy Solutions: • Disable any background programs, such as AntiVirus or Desktop Themes. • Ensure that video resolution is set to less than 1152 x 864 pixels. Invalid disc or no disc found message Solutions: ThinkStation P300 User Guide...

  • Page 67: Intermittent Problems

    • Ensure that a DVD disc is in the drive with the shiny side of the disc facing down. • Ensure that video resolution is set to less than 1152 x 864 pixels. • On computers that have a CD-ROM or CD-RW drive in addition to a DVD-ROM drive, ensure that the DVD disc is in the drive labeled “DVD”.

  • Page 68: Monitor Problems

    • Install the device drivers for the application programs. Refer to the documentation for the affected application program to check whether any device drivers are required. The image appears to be flickering Solution: Reset the refresh rate. 1. Open Control Panel. ThinkStation P300 User Guide...

  • Page 69: Networking Problems

    Note: To open Control Panel on Windows 8.1, see “Accessing Control Panel on the Windows 8.1 operating system” on page 22 2. Click Hardware and Sound ➙ Adjust screen resolution ➙ Advanced settings. 3. Click the Monitor tab to reset the refresh rate. Set the refresh rate to be the highest, noninterlaced refresh rate supported on your computer.
  • Page 70 • Check Network Name (SSID) and your password. – On Windows 7: 1. Click Start ➙ Lenovo ThinkVantage Tools ➙ Access Connections. 2. Switch to the Advanced view, and then click the Mobile Hotspot tab to check your SSID and password.

  • Page 71: I Have Connected An Option To My Computer, But It Does Not Work

    4. Select the Playback tab. 5. If you are using the Headset profile, select Bluetooth Hands-free Audio, and then click Set Default. If you are using the AV profile, select Stereo Audio, and then click Set Default. 6. Click OK. Note: Bluetooth is supported only on some computer models.

  • Page 72: The Printer Does Not Work

    • Install any application programs supplied with the serial device. Refer to the documentation that comes with the serial device for more information. • If you added one serial-connector adapter, install the adapter correctly. Software problems This section provides solutions to software-related problems. ThinkStation P300 User Guide...

  • Page 73: My Usb Connectors Cannot Be Accessed

    Note: If you are unable to isolate and repair the problem yourself after running the program, save and print the log files. You will need the log files when you speak to a Lenovo technical support representative. For additional information, refer to the Lenovo Solution Center help system.
  • Page 74 ThinkStation P300 User Guide...

  • Page 75: Chapter 8. Recovery Information

    Product Recovery program installed. If the Enhanced Backup and Restore icon in the Lenovo ThinkVantage Tools program is dimmed, it indicates that you must install the Rescue and Recovery program manually before enabling its features. To install the Rescue and Recovery program, do the following: 1.

  • Page 76: Creating Recovery Media

    Note: On the Windows 7 operating system, you can create recovery media using discs or external USB storage devices. To create recovery media on the Windows 7 operating system, click Start ➙ All Programs ➙ Lenovo ThinkVantage Tools ➙ Factory Recovery Disks. Then, follow the instructions on the screen.
  • Page 77 To perform a recovery operation using the Rescue and Recovery program on the Windows 7 operating system, do the following: 1. From the Windows desktop, click Start ➙ All Programs ➙ Lenovo ThinkVantage Tools ➙ Enhanced Backup and Restore. The Rescue and Recovery program opens.

  • Page 78: Creating And Using A Rescue Medium

    Creating a rescue medium To create a rescue medium on the Windows 7 operating system, do the following: 1. From the Windows desktop, click Start ➙ All Programs ➙ Lenovo ThinkVantage Tools ➙ Enhanced Backup and Restore. The Rescue and Recovery program opens.

  • Page 79: Reinstalling Preinstalled Programs And Device Drivers

    Reinstalling preinstalled programs and device drivers Your computer enables you to reinstall preinstalled programs and device drivers. Reinstalling preinstalled programs To reinstall programs preinstalled on your Lenovo computer, do the following: 1. Turn on the computer. 2. Go to C:\SWTOOLS.

  • Page 80: Solving Recovery Problems

    To reset your computer, do the following: 1. Move the pointer to the top-right or bottom-right corner of the screen to display the charms. Click Settings ➙ Change PC settings ➙ Update and recovery ➙ Recovery. ThinkStation P300 User Guide...

  • Page 81: Using The Advanced Startup Options

    2. In the Remove everything and reinstall Windows section, click Get started. Using the advanced startup options Advanced startup options enable you to change the startup settings of your Windows operating system, start the computer from an external device, or restore the Windows operating system from a system image. To use the advanced startup options, do the following: 1.
  • Page 82 ThinkStation P300 User Guide...

  • Page 83: Chapter 9. Installing Or Replacing Hardware

    Important safety information” on page v. Notes: • Use only computer parts provided by Lenovo. • When installing or replacing an option, use the appropriate instructions in this section along with the instructions that come with the option.

  • Page 84: Removing And Reinstalling The Front Bezel

    1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer. 2. Remove the computer cover. See “Removing the computer cover” on page 71. ThinkStation P300 User Guide...

  • Page 85: Installing Or Replacing A Pci Card

    3. Remove the front bezel by releasing the three plastic tabs on the left side and pivoting the front bezel outward. Figure 11. Removing the front bezel 4. To reinstall the front bezel, align the three plastic tabs on the right side of the front bezel with the corresponding holes in the chassis, then pivot the front bezel inwards until it snaps into position on the left side.
  • Page 86 3. At the rear of the computer, press the release button to open the card latch Figure 12. Opening the PCI card latch ThinkStation P300 User Guide...
  • Page 87 4. Depending on whether you are installing or replacing a PCI card, do one of the following: • If you are installing a PCI card, remove the appropriate metal slot cover. • If you are replacing an old PCI card, grasp the old card that is currently installed and gently pull it out of the slot.

  • Page 88: Installing Or Replacing A Memory Module

    2. Remove the computer cover. See “Removing the computer cover” on page 71. 3. Lay the computer on its side for easier access to the system board. 4. Locate the memory slots. See “Locating parts on the system board” on page 6. ThinkStation P300 User Guide...
  • Page 89 5. Remove any parts that might prevent your access to the memory slots. Depending on your computer model, you might need to remove the PCI Express x16 graphics card for easier access to the memory slots. See “Installing or replacing a PCI card” on page 73. 6.

  • Page 90: Installing Or Replacing A Device In The Optical Drive Bay

    This section provides instructions on how to install or replace an optical drive. Note: The following instructions also apply to a flex module and a 5.25-inch cage assembly. To install or replace an optical drive, do the following: ThinkStation P300 User Guide...
  • Page 91 1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer. 2. Remove the computer cover. See “Removing the computer cover” on page 71. 3.
  • Page 92 8. If you are installing a new optical drive, remove the plastic panel in the front bezel for the desired drive bay. What to do next: • To work with another piece of hardware, go to the appropriate section. ThinkStation P300 User Guide...
  • Page 93 • To complete the installation or replacement, go to “Completing the parts replacement” on page 125. Installing or replacing a device in the 5.25-inch flex module Attention: Do not open your computer or attempt any repair before reading and understanding the “Read this first: Important safety information”...
  • Page 94 Figure 27. Removing the plastic clip from the slim optical drive 4. Install the two screws to secure the plastic clip on the rear of the new slim optical drive. Figure 28. Installing the plastic clip to the slim optical drive ThinkStation P300 User Guide...
  • Page 95 5. Slide the new slim optical drive with the plastic clip into the flex module until the slim optical drive snaps into position. Figure 29. Installing the slim optical drive in the flex module 6. Position the flex module cover on the flex module so that the rail guides on the bottom of the flex module cover engage the rails on the flex module.
  • Page 96 Figure 32. Removing the card reader in the flex module c. Flex the four clips on the sides of the card reader retaining bracket to remove the card reader from the bracket. Figure 33. Removing the card reader from the card reader retaining bracket ThinkStation P300 User Guide...
  • Page 97 4. To install the a new card reader into the card reader retaining bracket, align the four holes in the card reader with the corresponding studs on the bracket and then press the new card reader downward until it snaps into position. Figure 34.
  • Page 98 2. Lift the clip on the side of the flex module upward and slide the flex module cover to the rear of the flex module to remove the cover. Figure 37. Removing the flex module cover 3. If you are replacing an eSATA connector or IEEE 1394 connector, do the following: ThinkStation P300 User Guide...
  • Page 99 a. Disconnect the eSATA connector or IEEE 1394 connector cable from the system board. See “Locating parts on the system board” on page 6. b. Press the two clips toward each other as shown to pull the eSATA connector or IEEE 1394 connector out of the flex module.
  • Page 100 1. Slide the 5.25-inch cage assembly out of the front of the computer. See “Installing or replacing a device in the optical drive bay” on page 78. 2. If you are replacing an old slim optical drive, do the following: ThinkStation P300 User Guide...
  • Page 101 a. press the release button to eject the tab that secures the slim optical drive. Then, slide the slim optical drive out of the front of the 5.25-inch cage assembly. Figure 41. Removing the slim optical drive in the 5.25-inch cage assembly b.
  • Page 102 To install or replace a slim optical drive in the 5.25-inch cage assembly, do the following: 1. Slide the 5.25-inch cage assembly out of the front of the computer. See “Installing or replacing a device in the optical drive bay” on page 78. ThinkStation P300 User Guide...
  • Page 103 2. If you are replacing an old hard disk drive, remove the four screws that secure the hard disk drive. Then, slide the hard disk drive out of the rear of the 5.25-inch cage assembly. Figure 45. Removing the hard disk drive from the 5.25-inch cage assembly 3.
  • Page 104 • To complete the installation or replacement, go to “Completing the parts replacement” on page 125. Installing or replacing a slim optical drive conversion board in the 5.25-inch cage assembly To install or replace a slim optical drive conversion board in the 5.25-inch cage assembly, do the following: ThinkStation P300 User Guide...
  • Page 105 1. Slide the 5.25-inch cage assembly out of the front of the computer. See “Installing or replacing a device in the optical drive bay” on page 78. 2. Remove the slim optical drive from the 5.25-inch cage assembly. See “Installing or replacing a slim optical drive in the 5.25-inch cage assembly”...

  • Page 106: Replacing The Front Audio And Usb Assembly

    6. Remove the screw that secures the front audio and USB assembly and slide the front audio and USB assembly to the right as shown to remove it from the chassis. Figure 51. Removing the front audio and USB assembly ThinkStation P300 User Guide...

  • Page 107: Replacing The Battery

    7. Route the cables of the new front audio and USB assembly through the corresponding square hole in the front of the chassis. Then position the new front audio and USB assembly into the chassis and slide it to the left as shown. Install the screw to secure the new front audio and USB assembly in place. Figure 52.

  • Page 108: Replacing The Power Supply Assembly

    Important safety information” on page v. Although there are no moving parts in your computer after the power cord has been disconnected, the following warnings are required for your safety and proper Underwriters Laboratories (UL) certification. CAUTION: ThinkStation P300 User Guide...
  • Page 109 Hazardous moving parts. Keep fingers and other body parts away. CAUTION: Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, current, and energy levels are present inside any component that has this label attached.

  • Page 110: Replacing The Heat Sink And Fan Assembly

    9. Install and tighten the four screws to secure the power supply assembly. Note: Use only screws provided by Lenovo. 10. Reconnect the power supply assembly cables to the system board and each of the drives.
  • Page 111 6. Follow the following sequence to remove the four screws that secure the heat sink and fan assembly to the system board: a. Partially remove screw , then fully remove screw , and then fully remove screw b. Partially remove screw , then fully remove screw , and then fully remove screw Note: Carefully remove the four screws from the system board to avoid any possible damage to the...

  • Page 112: Installing Or Replacing The Solid-State Drive

    2. Install the solid-state drive into the storage converter shipped with the solid-state drive. Then install the four screws to secure the solid-state drive to the storage converter. Figure 57. Installing the solid-state drive into the storage converter ThinkStation P300 User Guide...
  • Page 113 3. Remove the 3.5–inch hard disk drive bracket for the chassis. 4. To install the storage converter together with the solid-state drive into the 3.5-inch hard disk drive bracket, flex the bracket and align pin , pin , pin , and pin on the bracket with the corresponding holes in the storage converter.
  • Page 114 Figure 59. Removing the storage converter from the 3.5–inch hard disk drive bracket 7. Remove the four screws that secure the solid-state drive. Then lift the solid-state drive out of the storage converter. Figure 60. Removing the solid-state drive from the storage converter ThinkStation P300 User Guide...
  • Page 115 8. Install a new solid-state drive into the storage converter. Then install the four screws to secure the new solid-state drive to the storage converter. Figure 61. Installing the new solid-state drive into the storage converter 9. To install the storage converter into the 3.5-inch hard disk drive bracket, flex the bracket and align pin , pin , and pin on the bracket with the corresponding holes in the storage converter.

  • Page 116: Installing Or Replacing The Msata Solid-State Drive

    Figure 63. Installing the mSATA solid-state drive into the storage converter 2. Install the two screws to secure the mSATA solid-state drive to the storage converter. Figure 64. Installing the screws to secure the mSATA solid-state drive ThinkStation P300 User Guide...
  • Page 117 3. Slide the storage converter into the mSATA solid-state drive bay until it snaps into position. Then install the screw to secure the storage converter to the chassis. Figure 65. Installing the storage converter with mSATA solid-state drive into the chassis 4.
  • Page 118 9. To install a new mSATA solid-state drive, insert the mSATA solid-state drive into the mini PCI Express slot on the storage converter, and then press the mSATA solid-state drive downward. Figure 69. Installing the mSATA solid-state drive into the storage converter ThinkStation P300 User Guide...

  • Page 119: Replacing The Primary Hard Disk Drive

    10. Install the two screws to secure the mSATA solid-state drive to the storage converter. Figure 70. Installing the screws to secure the mSATA solid-state drive 11. Slide the storage converter with the new mSATA solid-state drive into the mSATA solid-state drive bay until it snaps into position.
  • Page 120 Do not touch the circuit board on the bottom of the hard disk drive. Figure 73. Installing the hard disk drive into the bracket ThinkStation P300 User Guide...

  • Page 121: Replacing The Secondary Hard Disk Drive

    8. Slide the new hard disk drive into the drive cage until it snaps into position. Figure 74. Installing the primary hard disk drive 9. Connect the signal cable and the power cable to the new hard disk drive. What to do next: •...

  • Page 122: Installing The Tertiary Hard Disk Drive

    Attention: Do not open your computer or attempt any repair before reading and understanding the “Read this first: Important safety information” on page v. Note: You can install a tertiary 3.5-inch hard disk drive or a 2.5-inch solid-state drive into the secondary optical-drive bay in your computer. ThinkStation P300 User Guide...
  • Page 123 To install a tertiary 3.5-inch hard disk drive or a 2.5-inch solid-state drive, do the following: 1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer. 2.
  • Page 124 Install the solid-state drive with the storage converter into the 5.25-inch optical drive bracket. Then, fully tighten the four screws to secure the solid-state drive with the storage converter to the 5.25-inch optical drive bracket. Figure 80. Installing the solid-state drive with the storage converter ThinkStation P300 User Guide...
  • Page 125 6. Install the optical drive retainer on the side of the optical drive bracket. Figure 81. Installing the optical drive retainer 7. Slide the optical drive bracket into the secondary optical-drive bay from the front of the computer until the optical drive bracket snaps into position. Figure 82.

  • Page 126: Replacing The Front Fan Assembly

    6. Install the new front fan assembly by aligning the new rubber mounts with the corresponding holes in the chassis and push the rubber mounts through the holes. 7. Pull the tips of the rubber mounts until the front fan assembly is secured in place. Figure 85. Installing the front fan assembly ThinkStation P300 User Guide...

  • Page 127: Replacing The Rear Fan Assembly

    8. Connect the front fan assembly cable to the power fan connector on the system board. What to do next: • To work with another piece of hardware, go to the appropriate section. • To complete the installation or replacement, go to “Completing the parts replacement” on page 125. Replacing the rear fan assembly Attention: Do not open your computer or attempt any repair before reading and understanding the “Read this first: Important safety information”...

  • Page 128: Replacing The Wi-Fi Units

    1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer. 2. Remove the computer cover. See “Removing the computer cover” on page 71. ThinkStation P300 User Guide...
  • Page 129 3. If your computer comes with a Wi-Fi card module that supports the Bluetooth function, disconnect the Bluetooth cable from the Wi-Fi adapter card. Figure 88. Disconnecting the Bluetooth cable Note: The Bluetooth cable connects the Bluetooth connector on the Wi-Fi adapter card to the front USB connector on the system board to support the Bluetooth function.

  • Page 130: Removing The Wi-Fi Card Module

    To remove the Wi-Fi card module, do the following: 1. Remove the Wi-Fi adapter card from the computer, and then disconnect the front and rear Wi-Fi antenna cables from the Wi-Fi card module. Figure 91. Removing the Wi-Fi antenna cables ThinkStation P300 User Guide...

  • Page 131: Installing The Wi-Fi Units

    2. Remove the two screws that secure the Wi-Fi card module to the Wi-Fi adapter card. Figure 92. Removing the screws that secure the Wi-Fi card module 3. Pull the Wi-Fi card module out of the mini PCI Express slot to remove it from the Wi-Fi adapter card. Figure 93.
  • Page 132 1. Insert the Wi-Fi card module into the mini PCI Express slot, and then install the two screws to secure the Wi-Fi card module to the Wi-Fi adapter card. Figure 94. Installing the Wi-Fi card module ThinkStation P300 User Guide...

  • Page 133: Installing Or Removing The Rear Wi-Fi Antenna

    2. Connect the front antenna cable and rear antenna cable to the Wi-Fi card module. Figure 95. Installing the Wi-Fi antenna cables 3. Install the Wi-Fi adapter card into the PCI Express x1 slot on the system board. See “Locating parts on the system board”...
  • Page 134 Figure 98. Removing the rear Wi-Fi antenna What to do next: • To work with another piece of hardware, go to the appropriate section. • To complete the installation or replacement, go to “Completing the parts replacement” on page 125. ThinkStation P300 User Guide...

  • Page 135: Installing Or Removing The Front Wi-Fi Antenna

    Installing or removing the front Wi-Fi antenna Attention: Do not open your computer or attempt any repair before reading and understanding the “Read this first: Important safety information” on page v. Installing the front Wi-Fi antenna To install the front Wi-Fi antenna, do the following: 1.

  • Page 136: Replacing The Keyboard Or Mouse

    “Locating connectors, controls, and indicators on the front of your computer” on page 2 or “Locating connectors on the rear of your computer” on page 3. Figure 102. Connecting the USB keyboard or mouse ThinkStation P300 User Guide...

  • Page 137: Completing The Parts Replacement

    What to do next: • To work with another piece of hardware, go to the appropriate section. • To complete the installation or replacement, go to “Completing the parts replacement” on page 125. Completing the parts replacement After completing the installation or replacement for all parts, you need to reinstall the computer cover and reconnect cables.

  • Page 138: Obtaining Device Drivers

    8. To update your configuration, refer to “Using the Setup Utility program” on page 37. Note: In most areas of the world, Lenovo requires the return of the defective CRU. Information about this will come with the CRU or will come a few days after the CRU arrives.

  • Page 139: Chapter 10. Getting Information, Help, And Service

    You can use the information in this section to access useful resources relating to your computing needs. Lenovo ThinkVantage Tools The Lenovo ThinkVantage Tools program guides you to a host of information sources and provides easy access to various tools to help you work more easily and securely.

  • Page 140: Lenovo Support Web Site

    Most computers come with a diagnostic program that help you identify hardware problems. You can also get the latest technical information and download device drivers and updates from Lenovo Support Web site at: http://www.lenovo.com/support...

  • Page 141: Using Other Services

    Service availability and service name might vary by country or region. For more information about these services, go to the Lenovo Web site at: http://www.lenovo.com...
  • Page 142 ThinkStation P300 User Guide...

  • Page 143: System Memory Speed

    1600 MHz E3-1225V3, Intel i7-4770, i5-4670, i5-4570 Table 3. DIMM type and speed: PC3-12800E (1.5 V) Microprocessor model Memory frequency Intel Xeon E3-1280V3, E3-1270V3, E3-1240V3, E3-1230V3, E3-1220V3, E3-1275V3, E3-1245V3, 1600 MHz E3-1225V3, Intel i7-4770, i5-4670, i5-4570 © Copyright Lenovo 2014, 2015...
  • Page 144 ThinkStation P300 User Guide...

  • Page 145: Appendix A. Regulatory Information

    • Consult an authorized dealer or service representative for help. Lenovo is not responsible for any radio or television interference caused by using other than specified or recommended cables and connectors or by unauthorized changes or modifications to this equipment.
  • Page 146 Geräte der Klasse B. Dieses Gerät ist berechtigt, in Übereinstimmung mit dem Deutschen EMVG das EG-Konformitätszeichen - CE - zu führen. Verantwortlich für die Konformitätserklärung nach Paragraf 5 des EMVG ist die Lenovo (Deutschland) GmbH, Gropiusplatz 10, D-70563 Stuttgart. Informationen in Hinsicht EMVG Paragraf 4 Abs. (1) 4: Das Gerät erfüllt die Schutzanforderungen nach EN 55024 und EN 55022 Klasse B.

  • Page 147: Eurasian Compliance Mark

    All regulatory notices are available on the Lenovo Support Web site in electronic format. To access electronic copies of the documentation, go to http://www.lenovo.com/UserManuals.
  • Page 148 ThinkStation P300 User Guide...

  • Page 149: Appendix B. Weee And Recycling Information

    Collecting and recycling a disused Lenovo computer or monitor If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of Resources.

  • Page 150: Battery Recycling Information For Taiwan

    If you need to replace it with a new one, contact your place of purchase or contact Lenovo for service. If you need to dispose of a disused lithium battery, insulate it with vinyl tape, contact your place of purchase or an industrial-waste-disposal operator, and follow their instructions.
  • Page 151 Customer participation is important to minimize any potential effects of batteries and accumulators on the environment and human health due to the potential presence of hazardous substances. For proper collection and treatment, go to: http://www.lenovo.com/recycling Appendix B. WEEE and recycling information...
  • Page 152 ThinkStation P300 User Guide...

  • Page 153: Appendix C. Restriction Of Hazardous Substances Directive (Rohs)

    (RoHS) European Union RoHS Lenovo products sold in the European Union, on or after 3 January 2013 meet the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (“RoHS recast” or “RoHS 2”).

  • Page 154: Ukraine Rohs

    Ukraine RoHS India RoHS RoHS compliant as per E-Waste (Management & Handling) Rules, 2011. ThinkStation P300 User Guide...

  • Page 155: Appendix D. Energy Star Model Information

    For more information about ENERGY STAR, go to: http://www.energystar.gov Lenovo encourages you to make efficient use of energy an integral part of your day-to-day operations. To help in this endeavor, set the following power-management features to take effect when your computer has been inactive for a specified duration: Table 4.
  • Page 156 ThinkStation P300 User Guide...

  • Page 157: Appendix E. Notices

    Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.

  • Page 158: Trademarks

    Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Lenovo Rescue and Recovery The Lenovo logo The ThinkStation logo ThinkStation ThinkVantage Microsoft, Windows, and Windows Media are trademarks of the Microsoft group of companies.

  • Page 159: Index

    Help and Support deleting a password Description device drivers important safety information devices, handling static-sensitive information diagnostics program, using getting diagnostics, troubleshooting important safety DisplayPort connector resources documentation, using safety drivers, device warranty © Copyright Lenovo 2014, 2015...
  • Page 160 Administrator service considerations and help Hard disk customer support center Power-on password getting setting, changing, deleting services passwords other ThinkStation P300 User Guide...
  • Page 161 BIOS updating the BIOS USB 2.0 connector USB 3.0 connector using a rescue medium, creating and diagnostic program documentation other services passwords Setup Utility VGA connector © Copyright Lenovo 2014, 2015...
  • Page 162 ThinkStation P300 User Guide...

Table of Contents