Tm , 4-Way Crossfirex Tm And Quad Crossfirex; Tm Operation Guide; Installing Two Crossfirex Tm -Ready Graphics Cards - ASROCK Z97 Extreme9 User Manual

2.10 CrossFireX
Quad CrossFireX
his motherboard supports CrossFireX
and Quad CrossFireX
x16 graphics cards. Currently CrossFireX
TM
CrossFireX are supported with Windows® 7 / 7 64-bit / 8 / 8 64-bit / 8.1 / 8.1 64-
bit OS.
1. You should only use identical CrossFireX
2. Make sure that your graphics card driver supports AMD CrossFireX
3. Make sure that your power supply unit (PSU) can provide at least the minimum
4. If you pair a 12-pipe CrossFireX
5. Diferent CrossFireX
2.10.1 Installing Two CrossFireX
CrossFire Bridge CrossFire Bridge
36
TM
, 3-Way CrossFireX
TM
Operation Guide
TM
that allows you to install up to four identical PCI Express
certiied.
Download the drivers from the AMD's website: www.amd.com
power your system requires. It is recommended to use a AMD certiied PSU. Please
refer to the AMD's website for details.
operate as 12-pipe cards while in CrossFireX
TM
cards may require diferent methods to enable CrossFi-
TM
reX . Please refer to AMD graphics card manuals for detailed installation guide.
TM
, 4-Way CrossFireX
TM TM
, 3-way CrossFireX
TM
, 3-way CrossFireX
TM
-ready graphics cards that are AMD
TM
Edition card with a 16-pipe card, both cards will
TM
mode.
TM
-Ready Graphics Cards
Step 1
Insert one graphics card into PCIE1 slot
and the other graphics card to PCIE4 slot.
Make sure that the cards are properly
seated on the slots.
Step 2
Connect two graphics cards by installing
a CrossFire Bridge on the CrossFire Bridge
Interconnects on the top of the graphics
cards. (he CrossFire Bridge is provided
with the graphics card you purchase, not
bundled with this motherboard. Please
refer to your graphics card vendor for
details.)
TM
and
TM
, 4-way CrossFireX
TM
and Quad
TM
technology.