Replacing The License Plate Light Bulb; Front Wheel - Yamaha FZS6V(C) Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screws.
1. Screw
6
2. License plate light unit
2. Remove the socket (together with
the bulb) by pulling it out.
EAU24310
1. License plate light bulb
2. License plate light bulb socket
3. Remove the defective bulb by pull-
ing it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by pushing it in.
6. Install the license plate light unit by
installing the screws.
6-35

Front wheel

To remove the front wheel
WARNING
G It is advisable to have a Yamaha
dealer service the wheel.
G
Securely support the motor-
cycle so that there is no danger
of it falling over.
1. Place the motorcycle on the cen-
terstand.
2. Loosen the front wheel axle pinch
bolt, then the wheel axle and the
brake caliper bolts.
1. Wheel axle
2. Front wheel axle pinch bolt
EAU24360
EAU33681
EWA10820