Connection To A Guitar Or Bass Guitar (Example 3) - Zoom 9001 Advanced Multi-Effecis Processor Operation Manual

Connection to a guitar or bass guitar (Example 3)
When using the 9001 with an instrument that has mono output, such as an electric
guitar, an acoustic guitar with pickup, or a bass guitar, connect the output from the
instrument to the L/MONO INPUT jack of the 9001, and connect the L OUTPUT jack
of the 9001 t o the amplifier. In this case, stereo effects such as reverb will be in mono.
When wishing to use the stcreo capabilities of the 9001, connect the L and R
OUTPUT jacks to two amplifiers.
Amplifier
(L or MONO)
Connection to
a microphone (Example
4)
To use the 9001 with a microphone, connect the output from the microphone to the
L/MONO INPUT jack of the 9001, and connect the L OUTPUT jack of the 9001 to
the amplifier. In this case, stcreo effects such as reverb will be in mono. When
wishing to use the stereo capabilities of the 9001, connect the L and R OUTPUT jacks
to two amplifiers.
Conventional dynamic microphones can be connected directly to the 9001, but
capacitor microphones are not supported. Since the output level from microphone
varies considerably depending on the model,
be
sure to adjust h e input sensitivity of
the 9001 to match the microphone in use.
INPUT UMONO
I
OUTPUT
L
I
9001
Playback equipment