Introduction & Machine Specifi Cations - Clarke 01602A Operator's Manual

Fusion 20; fusion 20t
Hide thumbs Also See for 01602A:
Table of Contents

Advertisement

Available languages

Available languages

ENGLISH
EN
WARNING:
Maintenance and repairs performed by unauthorized personnel could result in damage
or injury. Maintenance and repairs must be performed by authorized Clarke personnel
only.
WARNING:
Electrical components of this machine can "short-out" if exposed to water or moisture.
Keep the electrical components of the machine dry. Wipe the machine down after each
use. For storage, keep the machine in a dry building.
WARNING:
Operating a machine without observing all labels and instructional information could
result in injury or damage. Read all machine labels before attempting to operate.
Make sure all of the labels and instructional information are attached or fastened to the
machine. Get replacement labels and plates from your Clarke distributor.
WARNING:
Use only commercially available fl oor cleaners and waxes intended for machine
operation. Do not use fl ammable materials.
When cleaning, servicing or maintaining the machine, replacing parts or converting to another function, the
CAUTION:
power source should be switched off. Mains operated machines should be disconnected by removing the
power plug. Battery operated machines should be disconnected by removing the key of the power switch,
or any other effective means.
CAUTION:
Use of this machine to move other objects or to climb on could result in injury or dam-
age. Do not use this machine as a step or furniture. Do not ride on this machine.
CAUTION:
Your machine warranty will be voided if anything other than genuine Clarke parts are
used on your machine. Always use Clarke parts for replacement.
Introduction & Machine Specifications
Clarke's newly designed Fusion 20 and 20T burnishers are effi cient and superior fl oor burnishing
machines. The Fusion 20 uses one pad to burnish a path 20 inches wide. The powder created by
burnishing is collected by a dust control system in the pad housing. The Fusion 20 burnishers come
complete with three - 12 volt batteries, one pad driver, and one operator's manual.
SPECIFICATIONS:
Model
Fusion 20 (01603A)
Power Supply
36 volt
200AH
Motor, Pad
2.5 hp (1.9 kW) 65 amp
Motor Traction
Drive System
Pad Assist
Pad
20" (51cm)
Pad Speed
2000 rpm
Pad Pressure
0-30 lbs.
Speed, Forward
Pad Assist
Speed, Reverse
Pad Assist
Vibration
<2.5 m/s
Sound Level (dbA)
68
Drive Wheel
1.62"x8.00" (4cmx20cm)
Charger
36V, 25A,
85-265V / 45-65Hz
Length
50 inches (127cm)
Width
23 inches (58cm)
Height
41.25 inches (105cm)
Burnishing Swath
20 inch (51cm)
Polishing Rate
24,000 sq. ft./hr.
Weight (w/ 3-200 AH)
493 lbs./ 224 kg
Shipping Weight
590 lbs./ 268 kg
-4- FORM NO. 71446A
Fusion 20T (01602A)
36 volt
200AH
2.5 hp (1.9 kW) 65 amp
.5 hp PM / .37 kW
Direct Drive
20" (51cm)
2000 rpm
0-30 lbs
0 - 240 ft/min.
0 - 170 ft/min.
2
<2.5 m/s
2
68
1.62"x8.00" (4cmx20cm)
36V, 25A,
85-265V / 45-65Hz
50 inches (127cm)
23 inches (58cm)
41.25 inches (105cm)
20 inch (51cm)
24,000 sq. ft./hr.
507 lbs./ 230 kg
604 lbs./ 274 kg
Fusion 20 (01605A)
36 volt
234AH AGM
2.5 hp (1.9 kW) 65 amp
Pad Assist
20" (51cm)
2000 rpm
0-30 lbs.
Pad Assist
Pad Assist
<2.5 m/s
2
68
1.62"x8.00" (4cmx20cm)
36V, 25A,
85-265V / 45-65Hz
50 inches (127cm)
23 inches (58cm)
41.25 inches (105cm)
0 inch (51cm)
24,000 sq. ft./hr.
606 lbs./ 275 kg
703 lbs./ 319 kg
®
Clarke
Operator's Manual (EN) - FUSION 20 / 20T
Fusion 20T (01604A)
36 volt
234AH AGM
2.5 hp (1.9 kW) 65 amp
.5 hp PM / .37 kW
Direct Drive
20" (51cm)
2000 rpm
0-30 lbs
0 - 240 ft/min.
0 - 170 ft/min.
<2.5 m/s
2
68
1.62"x8.00"(4cmx20cm)
36V, 25A,
85-265V / 45-65Hz
50 inches (127cm)
23 inches (58cm)
41.25 inches (105cm)
20 inch (51cm)
24,000 sq. ft./hr.
620 lbs./ 281 kg
717 lbs./ 325 kg

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

01603a01604a01605aFusion 20Fusion 20t

Table of Contents