Casio IT-10 Series Hardware Manual page 13

Table 1.6 Names of parts
No. Part Name
1 IrDA communication
port
2 Detection switch
3 Status lamp
4 Power terminals
5 Power switch
6 Power adaptor port
7 RS-422 ports
8 RS-232C port
9 USB port
10 DIP switches
Align this port with the IrDA communication port of the terminal for data
transfer via the IrDA interface.
This switch detects when the terminal is correctly mounted on the Bridge
Satellite Cradle.
"POWER"
Indicates the power status.
Off : Power is off.
Green : Power is on and the terminal is correctly mounted on the Cradle.
Red : Power is on, but the terminal is not correctly mounted on the
Cradle.
"DATA"
Indicates the communication status.
Off : No communication.
Flashing green : Communication between the terminal and a PC is
established.
Red : Connection problem in the Cradle.
"LINE"
Indicates the system status.
Off : The system is not operational.
Green : The system is operational.
These terminals supply power to the terminal mounted on the Cradle.
Turns on the power on the Cradle.
Connect the dedicated AC adaptor (AD-S42120AE) to this port.
Use these two ports ("C-OUT" and "C-IN") when connecting up to eight
Bridge Satellite Cradles in series.
Use this port when connecting the terminal and a PC via the RS-232C interface.
Use this port when connecting the terminal and a PC via the USB interface.
Use these switches to configure the settings on the Cradle.
13
Description