Advertisement
Using Dual Time
The Dual Time Mode lets you set a second time (in 30 minute steps), so you can keep track
of the current time in another time zone, etc.
• The Dual Time Mode seconds count is synchronized with the Timekeeping Mode seconds
count.
• The same 12-hour/24-hour format you select for the Timekeeping Mode time is also used by
the Dual Time Mode.
• In the Timekeeping Mode, press the C button five times to enter the Dual Time Mode.
❚ To configure Dual Time settings
In the Dual Time Mode, press the D
D
D
D
D (+) button or A
A
A
A
A
(–) button to change the time setting in 30-minute
steps.
• Holding down either button changes the setting at high
speed.
• Pressing the B button changes the Dual Time Mode time
to the Timekeeping Mode time.
Configuring Time and Date Settings
Use the following procedure to set the current time and date after having the watch's
battery replaced, etc.
1.
In the Timekeeping Mode, hold down the B
B button
B
B
B
for about one second until the seconds start to
flash.
2.
C button to move the flashing to the
C
C
Use the C
C
setting you want to change.
Each press of C moves the flashing around the display in
the sequence shown below.
12/24-hour
Seconds
Minute
Hour
Timekeeping
Day
Month
Year
• You can set the year within the range of 2000 to 2039.
• The day of the week is set automatically in accordance with the date you set.
Operation Guide 2984
Resetting the Seconds Count to Zero
Resetting the zero count to zero on an accurate time signal about once a month helps to
ensure accurate timekeeping.
1.
In the Timekeeping Mode, hold down the B
for about one second until the seconds start to
flash.
Current Time
PM Indicator
(no display for AM)
Minute
2.
In accordance with a time signal on the TV or
radio, press the D
This resets the seconds to 00.
Hour
Seconds
Pressing the D button while the seconds count is in the range of 30 to 59 resets it to 00
and also adds 1 to the minutes. Pressing the D button in the range of 00 to 29 resets
the seconds count without changing the minutes.
• In Japan, you can obtain the current time by dialing 117 on the telephone.
3.
Use the D
D
D
D
D (+) and A
setting you want to change.
• Holding down either button changes the setting at high
speed.
Seconds
Use the C button to select each of the settings and the D and A buttons to change
them.
• When setting the hour, make sure you specify AM (no indicator) or PM (PM) correctly
if you are using 12-hour timekeeping, or that you specify the correct 24-hour time.
• When the 12/24-hour timekeeping setting is selected, press D to toggle between 12-
hour and 24-hour timekeeping.
Year
Month, Day
Hour
Minute
4.
After all the settings are the way you want, press the B
screen.
• The watch makes adjustments for leap years and month lengths automatically.
B
B
B button
B
D
D
D
D button.
(Decrease)
A
A (–) buttons to select the
A
A
B button to exit the setting
B
B
B
3.
After resetting the seconds, press the B
exit the setting screen.
Seconds
• The watch automatically exits the setting screen if you do not perform any operation for
about two or three minutes.
(Increase)
B
B button to
B
B
6
Advertisement
