Table of Contents
Advertisement
Press # in a text entry screen to select an
entry mode:
entry mode
j or g
Your Primary text entry mode can
be set to any iTAP
mode.
p or m
Your Secondary text entry mode can
be set to any iTAP p or tap m
mode, or set to None if you don't
want a secondary entry mode.
gm
Numeric mode enters numbers
only.
[
Symbol mode enters symbols only.
To set your primary and secondary text entry
modes, press - and select Entry Setup in a text
entry screen, then select Primary Setup or
Secondary Setup.
22
basics
TM
j or tap g
Tip: WANT TO SHOUT YOUR MESSAGE?
Press 0 in a text entry screen to change text
case to all capital letters (L), no capital letters
(í) or mixed capitals (ì).
TM
iTAP
mode
Press # in a text entry screen to switch to
iTAP mode. If you don't see j or p, press
M > Entry Setup to set iTAP mode as your
primary or secondary text entry mode.
iTAP mode lets you enter words using one
key press per letter. The iTAP software
combines your key presses into common
words, and predicts each word as you enter it.
Advertisement
Table of Contents
