Removal From Storage - Honda BF40D Owner's Manual

OUTBOARD MOTOR STAND
(commercially available)
If the outboard motor will be
removed from the boat for storage,
we recommend storing it vertically
by mounting it on a commercially
available stand.
CASE PROTECTOR
CUSHION (protective material)
If it is necessary to store the outboard
motor horizontally as shown, drain
the vapor separator (p. 94
drain the engine oil (p. 75
removing the outboard motor from
the boat.
Position the outboard motor with its
case protector side down, and rest the
outboard motor on a cushion of
protective material.
Any other horizontal storage position
may cause damage to the outboard
motor or oil leakage.
Cover the outboard motor to keep out
dust. Do not use plastic sheet as a
dust cover. A nonporous cover will
trap moisture, promoting rust and
corrosion.

REMOVAL FROM STORAGE

Check your outboard motor as
described in the
OPERATION
If the cylinders were coated with oil
), and during storage preparation, the
engine may smoke briefly at startup.
), before
This is normal.
STORAGE
BEFORE
chapter of this manual.
97