Table of Contents
Advertisement
1. On the Search Mode screen, press and hold the MODE switch for 3 seconds
2. The following search bank setting screen will appear.
Search: Search bank number 0 ~ 9. To change the search bank, press the MODE key.
Start: Select the start frequency. (Frequency range: 900 ~ 2800MHz). On above example, 09 is
highlighted in reverse color and 900 MHz has been set as the start frequency.
To change the first 2 digits, press the FREQ. Switch inward. The highlighted area will change
into green, indicating it is ready to change the parameter.
Press the FREQ. switch upward or downward to select the desired frequency.
To confirm entry, press the FREQ. switch inward again. The highlighted area will change into
white.
To change the last 2 digits of frequency, press the FREQ. switch downward. Repeat above
steps to change the last 2 digits of frequency.
End:
Select the end frequency. (Frequency range: 900 ~ 2800MHz). On the above example,
2800 will be highlighted in reverse color as 2800 MHz has been set as the end frequency.
To change the end frequency, perform the same procedures as the start frequency entry.
10
Advertisement
Table of Contents
