Fujitsu Laptop User Manual page 94

CAUTION
HOT
Some components around the memory slot are very hot immediately after use.
To avoid burns, do not install or remove memory immediately after turning off the
computer but wait for a while until its internal components cool down.
BREAKAGE
When installing or removing memory, hold its edge so as not to touch any terminal or
IC. Also, be careful not to touch internal components or terminals of the computer.
Touching these parts with oily fingers could result in poor electrical contact.
BREAKAGE
Memory is composed of static-sensitive parts, and it is easily broken by static discharged
from a human body. Before touching memory, always touch an appropriate metal object
to discharge static from your body.
BREAKAGE
When installing or removing memory, be sure to turn off your computer. If you install or
remove memory with the computer placed in standby or hibernation mode, data not
saved could be lost or the computer or memory could be broken.
Critical Point
To avoid damage, do not to touch internal components unnecessarily.
To avoid damage, be careful not to drop small objects removed, such as screws, into the
computer.
1. Turn off your computer and disconnect the AC adapter from it.
2. Slide the cover to the left to remove it.
(Your computer or situation may not look exactly like this illustration.)
Cover
79