Custom Function Settings; C.fn I: Exposure - Canon EOS 5D Mark II Instruction Manual

Custom Function SettingsN
3

C.Fn I: Exposure

C.Fn I -1
0: 1/3-stop
1: 1/2-stop
Sets 1/2-stop increments for the shutter speed, aperture, exposure
compensation, AEB, flash exposure compensation, etc. Effective when
you prefer to control the exposure in less fine increments than 1/3-stop
increments.
The exposure level will be displayed in the viewfinder and on the LCD
panel as shown below.
C.Fn I -2
0: 1/3-stop
1: 1-stop
C.Fn I -3
0: Off
1: On
Enables "L" (equivalent to ISO 50), "H1" (equivalent to ISO 12800), and
"H2" (equivalent to ISO 25600) to be selectable for the ISO speed.
C.Fn I -4
0: On
The AEB and WB-BKT settings will be canceled if you set the power
switch to <2> or clear the camera settings. AEB will also be
canceled when the flash is ready to fire.
1: Off
The AEB and WB-BKT settings will be retained even when the power
switch is set to <2>. (When the flash is ready, AEB will be canceled.
However, the AEB amount will be retained in memory.)
Downloaded From camera-usermanual.com Canon Manuals
174
Exposure level increments
ISO speed setting increments
ISO expansion
Bracketing auto cancel